Product Manuals

User Tools

Site Tools

You are here: manuals » ice » dual-current » ice-dc1_-_dual_current_controller
ice:dual-current:ice-dc1_-_dual_current_controller

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revisionBoth sides next revision
ice:dual-current:ice-dc1_-_dual_current_controller [2020/03/09 18:18] – created Ben Lueyice:dual-current:ice-dc1_-_dual_current_controller [2020/03/11 12:52] – Ben Luey
Line 5: Line 5:
 <function=ICEfunc|0=Laser?&1=I:CHANNEL:1&2=On&3=16> <function=ICEfunc|0=Laser?&1=I:CHANNEL:1&2=On&3=16>
 Returns the status (on or off) of the current controller for the channel CHANNEL specified. CHANNEL can be either 1 or 2. Returns the status (on or off) of the current controller for the channel CHANNEL specified. CHANNEL can be either 1 or 2.
-<html></div></html> 
  
 <function=ICEfunc|0=Laser&1=I:CHANNEL:1;A:On/Off:On&2=On&3=17> <function=ICEfunc|0=Laser&1=I:CHANNEL:1;A:On/Off:On&2=On&3=17>
 Turns the current on or off to channel CHANNEL. Returns the output of the command **LASER?** command. Turns the current on or off to channel CHANNEL. Returns the output of the command **LASER?** command.
-<html></div></html> 
- 
  
 <function=ICEfunc|0=CurrSet?&1=I:CHANNEL:1&2=97.6&3=18> <function=ICEfunc|0=CurrSet?&1=I:CHANNEL:1&2=97.6&3=18>
 Returns the current setpoint (in mA) for channel CHANNEL. Returns the current setpoint (in mA) for channel CHANNEL.
-<html></div></html> 
  
 <function=ICEfunc|0=CurrSet&1=I:CHANNEL:1;F:CURRENT:80.12&2=80.1&3=19> <function=ICEfunc|0=CurrSet&1=I:CHANNEL:1;F:CURRENT:80.12&2=80.1&3=19>
 Sets the current for the channel CHANNEL. Returns the output of the command **CURRSET** command. Sets the current for the channel CHANNEL. Returns the output of the command **CURRSET** command.
-<html></div></html> 
  
 <function=ICEfunc|0=CurrLim?&1=I:CHANNEL:1&2=120&3=20> <function=ICEfunc|0=CurrLim?&1=I:CHANNEL:1&2=120&3=20>
 Returns the current limit (in mA) for channel CHANNEL. Returns the current limit (in mA) for channel CHANNEL.
-<html></div></html> 
  
 <function=ICEfunc|0=CurrLim&1=I:CHANNEL:1;F:CURRENT:130&2=130&3=21> <function=ICEfunc|0=CurrLim&1=I:CHANNEL:1;F:CURRENT:130&2=130&3=21>
 Sets the current limit for the channel CHANNEL. Returns the output of the command **CURRLIM** command. Sets the current limit for the channel CHANNEL. Returns the output of the command **CURRLIM** command.
-<html></div></html>+ 
 +<function=ICEfunc|0=ServoEn?&1=I:CHANNEL:1&2=On&3=22> 
 +Returns the status (on or off) of enabling the analog current modulation input for servoing the laser current for the channel CHANNEL specified. CHANNEL can be either 1 or 2. 
 + 
 +<function=ICEfunc|0=ServoEn&1=I:CHANNEL:1;A:On/Off:On&2=On&3=23> 
 +Turns the analog current modulation input on or off to channel CHANNEL. Returns the output of the command **SERVOEN?** command. 
 + 
 +<function=ICEfunc|0=EvtData?&1=I:CHANNEL:1;I:ROW:3&2=67.34&3=25> 
 +Returns the current setting in the Event Jump Table for channel CHANNEL and row ROW.  
 + 
 +<function=ICEfunc|0=EvtData&1=I:CHANNEL:1;I:ROW:3;F:CURRENT:78.12&2=78.1&3=26> 
 +Sets the current to CURRENT in in the event table for row ROW and channel CHANNEL. 
  
  
ice/dual-current/ice-dc1_-_dual_current_controller.txt · Last modified: 2023/12/06 20:40 by Christiana Sasser