This is an old revision of the document!

DC1 Command Set

List of commands for the ICE DC1

Arguments:

[Int] CHANNEL

Example:

 1 
On

I₂C Command Number: 16

Returns the status (on or off) of the current controller for the channel CHANNEL specified. CHANNEL can be either 1 or 2. <html></div></html>

Arguments:

No Arguments Taken

Example:

I₂C Command Number:

Turns the current on or off to channel CHANNEL. Returns the output of the command LASER? command. <html></div></html>

Arguments:

[Int] CHANNEL

Example:

 1 
97.6

I₂C Command Number: 18

Returns the current setpoint (in mA) for channel CHANNEL. <html></div></html>

Arguments:

No Arguments Taken

Example:

I₂C Command Number:

Sets the current for the channel CHANNEL. Returns the output of the command CURRSET command. <html></div></html>

Arguments:

[Int] CHANNEL

Example:

 1 
120

I₂C Command Number: 20

Returns the current limit (in mA) for channel CHANNEL. <html></div></html>

Arguments:

No Arguments Taken

Example:

I₂C Command Number:

Sets the current limit for the channel CHANNEL. Returns the output of the command CURRLIM command. <html></div></html>