ice:dual-current:ice-dc1_-_dual_current_controller
This is an old revision of the document!
DC1 Command Set
List of commands for the ICE DC1
Arguments:
[Int] CHANNEL
Example:
1 On
I2C Command Number: 16
Description
Returns the status (on or off) of the current controller for the channel CHANNEL specified. CHANNEL can be either 1 or 2.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Turns the current on or off to channel CHANNEL. Returns the output of the command LASER? command.
Arguments:
[Int] CHANNEL
Example:
1 97.6
I2C Command Number: 18
Description
Returns the current setpoint (in mA) for channel CHANNEL.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Sets the current for the channel CHANNEL. Returns the output of the command CURRSET command.
Arguments:
[Int] CHANNEL
Example:
1 120
I2C Command Number: 20
Description
Returns the current limit (in mA) for channel CHANNEL.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Sets the current limit for the channel CHANNEL. Returns the output of the command CURRLIM command.
Arguments:
[Int] CHANNEL
Example:
1 On
I2C Command Number: 22
Description
Returns the status (on or off) of enabling the analog current modulation input for servoing the laser current for the channel CHANNEL specified. CHANNEL can be either 1 or 2.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Turns the analog current modulation input on or off to channel CHANNEL. Returns the output of the command SERVOEN? command.
Arguments:
[Int] CHANNEL [Int] ROW
Example:
1 3 67.34
I2C Command Number: 25
Description
Returns the current setting in the Event Jump Table for channel CHANNEL and row ROW.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Sets the current to CURRENT in in the event table for row ROW and channel CHANNEL.ice/dual-current/ice-dc1_-_dual_current_controller.1583931156.txt.gz · Last modified: 2021/08/26 14:26 (external edit)