Differences

This shows you the differences between two versions of the page.

--- slice:quick_start_qt [2018/12/20 00:23] – [Getting Started] Michael Radunsky
+++ slice:quick_start_qt [2019/04/02 16:19] – [SLICE-QT Four-Channel Temperature Controller Quick Start Guide] Michael Radunsky
@@ Line 9: / Line 9: @@
 Please read [[:limited_warranty|Limited Warranty]] and [[:warnings_cautions|General Warnings and Cautions]] prior to operating the SLICE-QT.
-[[slice:qt|SLICE-QT Owner's Manual]]\\
+====Links====
+Click here for the [[slice:qt|SLICE-QT Owner's Manual]]\\
+Click here for the [[slice:qt:API|SLICE-QT API]].\\
+Click here for the [[slice:Z-N|Ziegler-Nichols loop tuning instructions]].\\
+Click here for the [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]].\\
 [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT]] web page.\\
 Contact [[[email protected]|sales [at] vescent [dot] com]] for questions and corrections, or to request added functionality.
@@ Line 44: / Line 49: @@
   - Touch Settings > Plant
     - Enter in the parameters for your thermistor.\\ Note: Enter EITHER Beta, Reference Temperature, and Reference Resistance OR the Steinhart-Hart Constants, A, B, and C.  The other set of parameters will be automatically calculated.
-    - Select the Transducer Type: either TEC/Bipolar or Heater/Monopolar.
+    - Select the Transducer Type: either TEC/Bipolar or Heater/Monopolar as appropriate to your plant.
-    - When choosing TEC/Bipolar, also select Negative of Positive Polarity.
+    - When choosing TEC/Bipolar, also select Negative of Positive Polarity as appropriate.
     - Return to the CH Detail screen by touching the accept icon.
   - Touch Settings > Limits