Differences

This shows you the differences between two versions of the page.

--- slice:qt [2019/08/22 22:40] – [Home Screen] Michael Radunsky
+++ slice:qt [2019/08/29 19:05] – [Specifications] Michael Radunsky
@@ Line 81: / Line 81: @@
 | Connections                                                                                                                               | Host control: USB Type B                                                                                                                                                                                               |
 </tabcaption></WRAP>
+==== Extendable Legs ====
+The SLICE-QTC has four extendable legs (<imgref belly>).  Extending the front legs allows easy viewing from above (<imgref qt_prod_shot>) and extending the rear legs (<imgref side>) allows easy viewing from below.
+<WRAP half column><imgcaption belly|Underside of SLICE-QTC>{{ :slice:dcc:dcc_underbelly_labelled.png |}}</imgcaption>
+</WRAP>
+<WRAP half column><imgcaption side|Side view of SLICE-QTC configured for viewing from below>{{ : slice:dcc:slice-dcc_looking_down.png?400 |}}</imgcaption></WRAP>
 ===== Front Panel =====
@@ Line 369: / Line 376: @@
 It is possible to control the SLICE-QTC from a Windows<sup>®</sup>-based PC using a GUI.  In order to use the GUI, you must first download the latest version, connect the PC to the SLICE-QTC, and assign a COM port to the SLICE-QTC.  The following describes the steps involved.
-  - Download and store the latest GUI executable from the FTP site (Request copy of executable GUI from [[[email protected]|sales [at] vescent [dot] com]]).
+  - Download and store the latest GUI executable from [[ https://github.com/Vescent| the Vescent FTP site]] (or request copy of executable GUI from [[[email protected]|sales [at] vescent [dot] com]]).
   - Connect the SLICE-QTC to the PC using a USB type B cable.
   - Turn on the SLICE-QTC.