Differences

This shows you the differences between two versions of the page.

--- slice:qt [2019/08/22 22:40] – [Home Screen] Michael Radunsky
+++ slice:qt [2019/08/26 23:39] – [Using the Host GUI] Michael Radunsky
@@ Line 369: / Line 369: @@
 It is possible to control the SLICE-QTC from a Windows<sup>®</sup>-based PC using a GUI.  In order to use the GUI, you must first download the latest version, connect the PC to the SLICE-QTC, and assign a COM port to the SLICE-QTC.  The following describes the steps involved.
-  - Download and store the latest GUI executable from the FTP site (Request copy of executable GUI from [[[email protected]|sales [at] vescent [dot] com]]).
+  - Download and store the latest GUI executable from [[ https://github.com/Vescent| the Vescent FTP site]] (or request copy of executable GUI from [[[email protected]|sales [at] vescent [dot] com]]).
   - Connect the SLICE-QTC to the PC using a USB type B cable.
   - Turn on the SLICE-QTC.