Differences

This shows you the differences between two versions of the page.

--- slice:qt [2019/03/09 00:41] – [Usage] Michael Radunsky
+++ slice:qt [2019/03/12 22:25] – [Triggering] Michael Radunsky
@@ Line 306: / Line 306: @@
 <imgcaption out_gain|Adjusting the Gain & Offset of Channel 2 Output>{{ slice:slice-qt_i_o_gain_adjust.jpg?400x254 |}}</imgcaption>
+When the SLICE-QT is programmed to deliver data to an output port, the data that is being delivered will be indicated on the Channel Detail screen as seen in <imgref 4out>.  The numeral 1 in the magenta circle in the upper right-hand corner of the <color black/green>green</color> Error [mK] display field indicates that the error in temperature for CH 4 is being delivered to the front-panel I/O port ch 1.
+<imgcaption 4out|CH 4 ∆T data is being delivered to front-panel I/O channel 1>{{ slice:slice-qt_ch4_deltat_out_ch_1.jpg?400x234 |}}</imgcaption>
 <WRAP center round box 60%><tabcaption output |Front-panel ouput signals>
@@ Line 322: / Line 326: @@
 === Trigger In ===
-Currently, there are no input triggers allowed.
+Currently, there are no input triggers allowed for the SLICE-QT.
 ==== System Settings ====
 Touching the System Settings button on the Control Bar (<imgref sys_butt>) will open the System Settings screen as seen in <imgref settings>.