Model No. SLICE-DCC

Document Revision: 1

Document Last Updated on 2023/05/01 18:43

Please read Limited Warranty and General Warnings and Cautions prior to operating the SLICE-DCC.

Click here for the main manuals page.
Click here for the SLICE-DCC API.
Click here for the SLICE-DCC web page.
Click here for the Github page for SLICE-DCC GUI
Click here for the Github page for SLICE-DCC firmware revisions
Please check back for added functionality. Contact sales [at] vescent [dot] com for questions and corrections, or to request added functionality.

	Warning. Pay special attention to procedures and notes. If procedure is not followed carefully, damage to the SLICE-DCC or devices connected to it may occur.
	Potential for electrical shock hazard.

The SLICE-DCC Current Controller is intended for driving laser diodes. When using lasers particular care must be given to avoid exposure hazards.