Product Manuals

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======SLICE-(D)LC (Dual-Channel) Laser Controller with ultra-low-noise current source and two channels of temperature control per current channel ======

Model No. SLICE-(D)LC

Document Revision: 1

Document Last Updated on ~~LASTMOD~~

Please read [[:limited_warranty|Limited Warranty]] and [[:warnings_cautions|General Warnings and Cautions]] prior to operating the SLICE-(D)LC.

==== Links ====
Click here for the [[http://www.vescent.com/manuals/doku.php?id=manuals|main manuals page]].\\
Click here for the [[slice:dlc:API|SLICE-(D)LC API]].\\
Click here for the SLICE-LC web page.\\
Click here for the Github page for SLICE-(D)LC GUI\\
Click here for the Github page for SLICE-(D)LC firmware revisions\\
Please check back for added functionality.  Contact [[sales@vescent.com|sales [at] vescent [dot] com]] for questions and corrections, or to request added functionality.
===== List of Warning Symbols =====

<WRAP center round box 60%>
| {{ :warning-sign.png?100&nolink }}    | Warning.  Pay special attention to procedures and notes.  If procedure is not followed carefully, damage to the SLICE-(D)LC or devices connected to it may occur.  |
| {{ :electric_shock.png?100&nolink }}  | Potential for electrical shock hazard.                                                                                                                           |

</WRAP>

The SLICE-(D)LC Current Controller is intended for driving laser diodes.  When using lasers particular care must be given to avoid exposure hazards.

{{ d2:d2-100:class_iiib.png?250 }}