Product Manuals

User Tools

Site Tools

You are here: manuals » slice » dcc
slice:dcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
slice:dcc [2020/04/29 22:25] – [Specifications] Michael Radunskyslice:dcc [2020/04/29 22:45] – [Connecting to the Laser Diode] Michael Radunsky
Line 203: Line 203:
 The Home screen displays the status of both channels (<imgref home_scr_dcc>).  The data for each channel is arranged vertically.   At a glance, for each channel, I<sub>set</sub>, and Compliance Voltage can be read.  Touching the blue window labelled Voltage [V] will cause this window to toggle from displaying  Compliance Voltage to displaying dissipated Power. The Home screen displays the status of both channels (<imgref home_scr_dcc>).  The data for each channel is arranged vertically.   At a glance, for each channel, I<sub>set</sub>, and Compliance Voltage can be read.  Touching the blue window labelled Voltage [V] will cause this window to toggle from displaying  Compliance Voltage to displaying dissipated Power.
 ==== Connecting to the Laser Diode ==== ==== Connecting to the Laser Diode ====
-The SLICE-DCC requires that the cathode of the laser diode is at ground.+The SLICE-DCC requires that the cathode of the laser diode is at ground (<imgref cath_gnd>). 
 +<imgcaption cath_gnd>|Wiring configuration for laser diode>{{ : slice:dcc:cathode_ground.png?430 |}}</imgcaption>
  
 ==== Setting the Operation Mode ==== ==== Setting the Operation Mode ====
slice/dcc.txt · Last modified: 2024/03/27 21:07 by Thomas Bersano