Product Manuals

User Tools

Site Tools

You are here: manuals » slice » dcc
slice:dcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
slice:dcc [2020/04/29 22:15] – [Setting the Operation Mode] Michael Radunskyslice:dcc [2020/04/29 22:45] – [Connecting to the Laser Diode] Michael Radunsky
Line 99: Line 99:
 | \\ \\ Maximum Current                                                |  200 mA\\ 500 mA\\ 1,000 A\\ 2,000 mA   | | \\ \\ Maximum Current                                                |  200 mA\\ 500 mA\\ 1,000 A\\ 2,000 mA   |
 | \\ \\ Current Noise((Constant Current Mode)) ((rms 100 Hz to 1 MHz))  |  1.5\\ 4\\ 10\\ 15                      | | \\ \\ Current Noise((Constant Current Mode)) ((rms 100 Hz to 1 MHz))  |  1.5\\ 4\\ 10\\ 15                      |
-| Input Impedance \\ Rear \\ Front  |  \\ >20 kΩ\\ 50 Ω or 1 MΩ  |+| Current Modulation Input Impedance \\ Rear \\ Front  |  \\ >20 kΩ\\ 50 Ω or 1 MΩ  |
 | Modulation Bandwidth((-3 dB point)), ((front & rear modulation input ports))|  DC to >1 MHz                | | Modulation Bandwidth((-3 dB point)), ((front & rear modulation input ports))|  DC to >1 MHz                |
 |Modulation Depth          \\ SLICE-DCC-200\\ SLICE-DCC-500\\ SLICE-DCC-1000\\ SLICE-DCC-2000 |  \\ ±10 mA\\ ±25 mA\\ ±50 mA\\ ±50 mA  | |Modulation Depth          \\ SLICE-DCC-200\\ SLICE-DCC-500\\ SLICE-DCC-1000\\ SLICE-DCC-2000 |  \\ ±10 mA\\ ±25 mA\\ ±50 mA\\ ±50 mA  |
Line 107: Line 107:
 | Drift                                                                |  <25 µA/°C                              | | Drift                                                                |  <25 µA/°C                              |
 | Power Stability((constant power mode))                               |  0.1% rms((relative to maximum power))  | | Power Stability((constant power mode))                               |  0.1% rms((relative to maximum power))  |
 +| Monitor Photodiode Input Current Range  | ±5 mA |
 | Maximum Compliance Voltage                                           |  12 V                                   | | Maximum Compliance Voltage                                           |  12 V                                   |
 | Triggering                                                           |  TTL                                    | | Triggering                                                           |  TTL                                    |
Line 202: Line 203:
 The Home screen displays the status of both channels (<imgref home_scr_dcc>).  The data for each channel is arranged vertically.   At a glance, for each channel, I<sub>set</sub>, and Compliance Voltage can be read.  Touching the blue window labelled Voltage [V] will cause this window to toggle from displaying  Compliance Voltage to displaying dissipated Power. The Home screen displays the status of both channels (<imgref home_scr_dcc>).  The data for each channel is arranged vertically.   At a glance, for each channel, I<sub>set</sub>, and Compliance Voltage can be read.  Touching the blue window labelled Voltage [V] will cause this window to toggle from displaying  Compliance Voltage to displaying dissipated Power.
 ==== Connecting to the Laser Diode ==== ==== Connecting to the Laser Diode ====
-The SLICE-DCC requires that the cathode of the laser diode is at ground.+The SLICE-DCC requires that the cathode of the laser diode is at ground (<imgref cath_gnd>). 
 +<imgcaption cath_gnd>|Wiring configuration for laser diode>{{ : slice:dcc:cathode_ground.png?430 |}}</imgcaption>
  
 ==== Setting the Operation Mode ==== ==== Setting the Operation Mode ====
slice/dcc.txt · Last modified: 2024/03/27 21:07 by Thomas Bersano