Differences

This shows you the differences between two versions of the page.

--- slice:dcc [2020/03/07 00:02] – [Specifications] Michael Radunsky
+++ slice:dcc [2020/03/07 00:05] – [Rear-Panel Modulation] Michael Radunsky
@@ Line 234: / Line 234: @@
 ==== Rear-Panel Modulation ====
-On the rear panel of the SLICE-DCC is an input for servoing or modulating the current output.  (<imgref back>, item 9).  The transfer function for this input is 1 mA/V and the input range is ±10 V.  Therefore the current can be modulated by ±10 mA.  The 3-dB bandwidth of this modulation input is DC to 1 MHz.
+On the rear panel of the SLICE-DCC is an input for servoing or modulating the current output.  (<imgref back>, item 9).  The transfer function for this input is depends on the current capacity.  The input range is ±10 V.  The current can be modulated over the full range of current except for the 2,000 mA model which can only swing ±500 mA.  The 3-dB bandwidth of this modulation input is DC to 1 MHz.
 <WRAP center round box 60%>