Differences

This shows you the differences between two versions of the page.

--- ice:commands:master [2013/12/04 20:14] – Michael Radunsky
+++ ice:commands:master [2014/07/31 01:37] – external edit 127.0.0.1
@@ Line 19: / Line 19: @@
 <function=ICEfunc|0=#Sleep&1&2=Sleeping...&3=-1>
 Puts ICE platform into a low power state from which it can be woken via serial connection.
-All power to attached ICE devices will be turned off during sleep.
+All power to attached ICE devices will be turned off during sleep. Note: This isn't currently implemented.
 <html></div></html>
-<function=ICEfunc|0=#PowerOn&1&2=Powering On...&3=-1>
+<function=ICEfunc|0=#PowerOn&1&2=Sytem Power ON&3=-1>
 Enables power to all attached ICE devices.
 <html></div></html>
-<function=ICEfunc|0=#PowerOff&1&2=Powering Off...&3=-1>
+<function=ICEfunc|0=#PowerOff&1&2=System Power OFF&3=-1>
 Disables power to all attached ICE devices.
 All devices are notified before shutdown to perform a safe power off.
 <html></div></html>
-<function=ICEfunc|0=#RawMode&1=B:ENABLE:T&2=On&3=-1>
+<function=ICEfunc|0=#RawMode&1=B:ENABLE:T&2=ON&3=-1>
 Switches command mode into raw mode. Argument is either 'T' for on or 'F' for off.
 Raw mode disables the use of ASCII command mnemonics, instead using integer command ID's.
 <html></div></html>
-<function=ICEfunc|0=#Status&2=On&3=-1>
+<function=ICEfunc|0=#Status&2=ON&3=-1>
 Returns state of power supplies to slave boards as either ON of OFF.
 <html></div></html>
-<function=ICEfunc|0=#Version&2=1&3=-1>
+<function=ICEfunc|0=#Version&2=1.0&3=-1>
 Returns firmware version of master board.
 <html></div></html>
-<function=ICEfunc|0=#Interactive&2=1.2&3=-1>
+<function=ICEfunc|0=#Interactive&1=B:ENABLE:T&2=ON&3=-1>
 Switches serial interface between an interactive mode (featuring prompts and local echo) to a
 programmatic mode. Defaults to programmatic mode (false).
 <html></div></html>