ice:commands:master
This is an old revision of the document!
Master Board Command Set
List of commands for the ICE Master Board.
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Sets that the Master board will communicate with ICE Slave number BOARD. If BOARD is not specified, returns the ICE Slave number it is currently communicating with. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Shows a list of all connected devices. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Fully powers off ICE platform. Restarting requires physical intervention (power button press) by user. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Puts ICE platform into a low power state from which it can be woken via serial connection. All power to attached ICE devices will be turned off during sleep. Note: This isn't currently implemented. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Enables power to all attached ICE devices. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Disables power to all attached ICE devices. All devices are notified before shutdown to perform a safe power off. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Switches command mode into raw mode. Argument is either 'T' for on or 'F' for off. Raw mode disables the use of ASCII command mnemonics, instead using integer command ID's. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Returns state of power supplies to slave boards as either ON of OFF. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Returns firmware version of master board. <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Switches serial interface between an interactive mode (featuring prompts and local echo) to a programmatic mode. Defaults to programmatic mode (false). <html></div></html>ice/commands/master.1406770657.txt.gz · Last modified: 2021/08/26 14:26 (external edit)