Both sides previous revisionPrevious revisionNext revision | Previous revision |
d2:spectroscopy_module_210 [2020/03/16 22:17] – [Theory of Operation] Michael Radunsky | d2:spectroscopy_module_210 [2024/03/27 15:58] (current) – [Spectroscopy Module] Thomas Bersano |
---|
Document Last Updated on ~~LASTMOD~~ | Document Last Updated on ~~LASTMOD~~ |
| |
Please read [[:limited_warranty|Limited Warranty]] and [[:warnings_cautions|General Warnings and Cautions]] prior to operating the D2-210. D2-210 [[http://www.vescent.com/products/electro-optics/d2-210-spectroscopy-module/|website]] and [[http://www.vescent.com/wp-content/uploads/2014/07/D2-210_2.3.pdf|data sheet]]. | Please read [[:limited_warranty|Limited Warranty]] and [[:warnings_cautions|General Warnings and Cautions]] prior to operating the D2-210. D2-210 [[http://www.vescent.com/products/electro-optics/d2-210-spectroscopy-module/|website]] and [[https://vescent.com/us/amfile/file/download/file/58/product/161/|data sheet]]. |
| |
=====Description===== | =====Description===== |
<imgcaption image1|Pin numbering on female Hirose 6-pin connector>{{ :d2:d2-160:hirose-connector.png?200 }}</imgcaption> | <imgcaption image1|Pin numbering on female Hirose 6-pin connector>{{ :d2:d2-160:hirose-connector.png?200 }}</imgcaption> |
| |
<WRAP center round box 900px><tabcaption connector> | <WRAP center round box 900px><tabcaption connector|Power cable pin out> |
^ Hirose Pin ^ DB-9 Pin (if applicable) ^ Input Voltage ^ Max Current Draw ^ Notes ^ | ^ Hirose Pin\\ (VPN00410 and VPN00475) ^ DB-9 Pin (VPN00410) ^ Input Voltage ^ Max Current Draw ^ Notes ^ |
| 1 | 4 and 5 | Signal Power Ground | | Return path for power rail. | | | 1 | 4 and 5 | Signal Power Ground | | Return path for power rail. | |
| 2 | 8 | -7 V to -15 V | 100mA | See note below. | | | 2 | 8 | -7 V to -15 V | 100mA | See note below. | |
| 6 | 1 and 2 | +5 V Ground | | Return path for high current +5V. | | | 6 | 1 and 2 | +5 V Ground | | Return path for high current +5V. | |
</tabcaption></WRAP> | </tabcaption></WRAP> |
<wrap lo>Note: When powering the D2-210 with supplies other than a D2-005, pins 5 and 6 can be placed between 7-15 V. They need not be symmetric, but both supply rails are always required.</wrap> | |
<wrap lo> See D2-005 manual for pin out on D-Sub 9-pin connector.</wrap> | |
| |
| |
| |
| |
| |
The following images are representative of spectroscopy for <sup>87</sup>Rb with and without Doppler subtraction. Note that Doppler subtraction (<imgref ds>) has a minimal effect on peak lock signal generated by dithering the laser (green traces). | The following images are representative of spectroscopy for <sup>87</sup>Rb with (<imgref ds>) and without Doppler subtraction (<imgref no-ds>). Note that Doppler subtraction has a minimal effect on peak lock signal generated by dithering the laser (green traces). |
| |
<imgcaption image1|Pin numbering on female Hirose 6-pin connector>{{ :d2:d2-160:hirose-connector.png?200 }}</imgcaption> | <imgcaption image1|Pin numbering on female Hirose 6-pin connector>{{ :d2:d2-160:hirose-connector.png?200 }}</imgcaption> |