The list of API Commands for the Compact ICE can be found below in the “Downloads” section. Links to related pages are also included, as well as instructions for sending commands over the Mini USB-B connector.
* Electronics
* Websites
* Downloads
Listed below is the command set for the Application Programming Interface (API).
Computer communication to the Compact ICE instrument occurs by first establishing a Serial COM port via the mini USB-B physical interface. The following table shows the serial port settings:
Baud Rate | 115200 |
---|---|
Data Bits | 8 |
Parity | None |
Stop Bits | 1 |
Flow Control | None |
To perform an operation, an ASCII-based text message is first constructed from a command and its arguments, and then the message is transmitted to the Compact ICE instrument through the COM port. The following rules apply:
*To receive a reply from Compact ICE, #shadowusart true
must be sent first