Product Manuals

User Tools

Site Tools

You are here: manuals » slice » qt
slice:qt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
slice:qt [2019/03/09 00:41] – [General Concepts] Michael Radunskyslice:qt [2019/03/12 22:33] – [System Settings] Michael Radunsky
Line 117: Line 117:
 You may purchase more cables separately from Vescent Photonics.  We do not recommend making cables, but if you do so, make sure the metal sleeve is well grounded to provide proper shielding to the signal cables. You may purchase more cables separately from Vescent Photonics.  We do not recommend making cables, but if you do so, make sure the metal sleeve is well grounded to provide proper shielding to the signal cables.
  
-===== Usage =====+===== Operating the SLICE-QT =====
 ==== Screen Navigation ==== ==== Screen Navigation ====
 The touch screen interface and the Host GUI operate in a substantially similar way, except touch is substituted for a click in the touch screen interface. The touch screen interface and the Host GUI operate in a substantially similar way, except touch is substituted for a click in the touch screen interface.
Line 306: Line 306:
  
 <imgcaption out_gain|Adjusting the Gain & Offset of Channel 2 Output>{{ slice:slice-qt_i_o_gain_adjust.jpg?400x254 |}}</imgcaption> <imgcaption out_gain|Adjusting the Gain & Offset of Channel 2 Output>{{ slice:slice-qt_i_o_gain_adjust.jpg?400x254 |}}</imgcaption>
 +
 +When the SLICE-QT is programmed to deliver data to an output port, the data that is being delivered will be indicated on the Channel Detail screen as seen in <imgref 4out>.  The numeral 1 in the magenta circle in the upper right-hand corner of the <color black/green>green</color> Error [mK] display field indicates that the error in temperature for CH 4 is being delivered to the front-panel I/O port ch 1.
 +
 +<imgcaption 4out|CH 4 ∆T data is being delivered to front-panel I/O channel 1>{{ slice:slice-qt_ch4_deltat_out_ch_1.jpg?400x234 |}}</imgcaption>
  
 <WRAP center round box 60%><tabcaption output |Front-panel ouput signals> <WRAP center round box 60%><tabcaption output |Front-panel ouput signals>
Line 322: Line 326:
  
 === Trigger In === === Trigger In ===
-Currently, there are no input triggers allowed.  +Currently, there are no input triggers allowed for the SLICE-QT.  
 ==== System Settings ==== ==== System Settings ====
 Touching the System Settings button on the Control Bar (<imgref sys_butt>) will open the System Settings screen as seen in <imgref settings>. Touching the System Settings button on the Control Bar (<imgref sys_butt>) will open the System Settings screen as seen in <imgref settings>.
Line 334: Line 338:
  
 === Firmware Version === === Firmware Version ===
-Current firmware versions are reported here.+Current firmware versions are reported here.   
 + 
 +<WRAP center round box 60%><tabcaption firmware_rev |Most recent firmware versions> 
 +| Firmware | Version Level | Release Date | 
 +| System Controller| 1.22| 1 March 2019| 
 +| QT| 1.36| 1 March 2019| 
 +</tabcaption></WRAP>
  
 === Host GUI === === Host GUI ===
slice/qt.txt · Last modified: 2023/08/11 15:53 by 127.0.0.1