Differences

This shows you the differences between two versions of the page.

--- slice:qt [2019/03/09 00:41] – [General Concepts] Michael Radunsky
+++ slice:qt [2019/03/12 22:24] – [Front-panel Inputs & Outputs] Michael Radunsky
@@ Line 117: / Line 117: @@
 You may purchase more cables separately from Vescent Photonics.  We do not recommend making cables, but if you do so, make sure the metal sleeve is well grounded to provide proper shielding to the signal cables.
-===== Usage =====
+===== Operating the SLICE-QT =====
 ==== Screen Navigation ====
 The touch screen interface and the Host GUI operate in a substantially similar way, except touch is substituted for a click in the touch screen interface.
@@ Line 306: / Line 306: @@
 <imgcaption out_gain|Adjusting the Gain & Offset of Channel 2 Output>{{ slice:slice-qt_i_o_gain_adjust.jpg?400x254 |}}</imgcaption>
+When the SLICE-QT is programmed to deliver data to an output port, the data that is being delivered will be indicated on the Channel Detail screen as seen in <imgref 4out>.  The numeral 1 in the magenta circle in the upper right-hand corner of the <color black/green>green</color> Error [mK] display field indicates that the error in temperature for CH 4 is being delivered to the front-panel I/O port ch 1.
+<imgcaption 4out|CH 4 ∆T data is being delivered to front-panel I/O channel 1>{{ slice:slice-qt_ch4_deltat_out_ch_1.jpg?400x234 |}}</imgcaption>
 <WRAP center round box 60%><tabcaption output |Front-panel ouput signals>