Differences

This shows you the differences between two versions of the page.

--- slice:dcc:api [2019/12/10 01:03] – [SLICE-DCC-specific Commands] Michael Radunsky
+++ slice:dcc:api [2019/12/10 05:23] – [SLICE-DCC-specific Commands] Michael Radunsky
@@ Line 265: / Line 265: @@
 ----
 <function=ICEfunc|0=TRIGOUT?&1=I:CHANNEL:1&2=1&-1>
-Returns the response of the output trigger to the status of the interlock. In the example, the the output trigger will echo the interlock circuit status.\\ \\
+Returns the response of the output trigger to the status of the interlock. In the example, the output trigger will echo the interlock circuit status.\\ \\
 __Input parameter ranges__\\
 CHANNEL: {1,2}\\
@@ Line 285: / Line 285: @@
   * Trigger output low: interlock closed\\
+----
+<function=ICEfunc|0=HWTEMP?&1=I:CHANNEL:1&2=43.358&-1>
+Returns the temperature of the SLICE-DCC "personality board" at the sensor point for channel CHANNEL. In the example, the temperature at the sensor point for channel 1 is 43.358°C.\\ \\
+__Input parameter ranges__\\
+CHANNEL: {1,2}\\
+----
+<function=ICEfunc|0=PWRMAX?&1=:None&2=41.5&-1>
+Returns the maximum power (in Watts) available as configured. In the example, the power available is 41.5 W.\\ \\
+__Input parameter ranges__\\
+CHANNEL: {1,2}\\
+__Possible output values__\\
+Power: (0 to 41.5 W)
 ----
 ===== Error Handling =====