User Tools

Site Tools


waveguide:manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
waveguide:manual [2016/03/02 14:16]
Michael Radunsky [Operation]
waveguide:manual [2016/03/02 14:24] (current)
Michael Radunsky [Operation]
Line 94: Line 94:
 <WRAP right round box 550px><imgcaption pinout| Pin-Out for the LC-105 connection to the optical head.>{{ :waveguide:manuals:3_pin_out.png?500}}</imgcaption></WRAP> <WRAP right round box 550px><imgcaption pinout| Pin-Out for the LC-105 connection to the optical head.>{{ :waveguide:manuals:3_pin_out.png?500}}</imgcaption></WRAP>
    
-The cable plugs into the LS-105 with a push connector (female bulkhed connector: [[http://www.digikey.com/product-detail/en/hirose-electric-co-ltd/HR10A-10R-10SB/HR359-ND/279920|Hirose HR10A-10R-10SB]]; male cable end: [[http://www.digikey.com/product-detail/en/hirose-electric-co-ltd/HR10A-10P-10P/HR116-ND/40909|Hirose HR10A-10P-10P]]).  To remove the cable simply pull from the metal housing on the end of the connector.  The connector pin-out is shown in <imgref pinout> The clip leads are labeled appropriately.+The cable plugs into the LS-105 with a push connector (female bulkhead connector: [[http://www.digikey.com/product-detail/en/hirose-electric-co-ltd/HR10A-10R-10SB/HR359-ND/279920|Hirose HR10A-10R-10SB]]; male cable end: [[http://www.digikey.com/product-detail/en/hirose-electric-co-ltd/HR10A-10P-10P/HR116-ND/40909|Hirose HR10A-10P-10P]]).  To remove the cable simply pull from the metal housing on the end of the connector.  The connector pin-out is shown in <imgref pinout> The clip leads are labeled appropriately.
  
 ===Prototype EO Scanner Optical Head=== ===Prototype EO Scanner Optical Head===
waveguide/manual.txt · Last modified: 2016/03/02 14:24 by Michael Radunsky