Differences

This shows you the differences between two versions of the page.

--- warnings_cautions [2017/10/12 00:18] – Michael Radunsky
+++ warnings_cautions [2022/04/01 19:09] (current) – external edit 127.0.0.1
@@ Line 37: / Line 37: @@
 | {{ :warning-sign.png?nolink&100 | }}| Never connect or disconnect the D2-105 Laser Controller to/from a laser with the D2-105 energized.  Always power down the D2-105 completely before making connections to the laser.|
 </WRAP>
+<WRAP left round box 60%>
+| {{ :warning-sign.png?100&nolink }}  | Any input/output connections to the SLICE instrument must be derived from a Safety Extra Low Voltage (SELV) source.                                                           |
+| :::                                 | If this instrument is used in a manner not specified by the manufacturer in this manual or other relevant literature, protection provided by the instrument may be impaired.  |
+</WRAP>
+<WRAP left round box 60%>
+| {{ :warning-sign.png?100&nolink }}  | **Never** connect either of the TEC leads on a plant or the SLICE-QTC to ground. This configuration is very likely to cause severe damage to the SLICE-QTC.  |
+</WRAP>