test
Phase?
Arguments:
No Arguments Taken
Example:
Phase? 58
I2C Command Number: 32
Description
Returns the phase shift (in degrees) on the dither signal modulating the laser current.</div>
Phase
Arguments:
[Float] PHASE
Example:
Phase 23 22.5
I2C Command Number: 33
Description
Sets the phase shift to PHASE (in degrees) on the dither signal modulating the laser current. Returns the output of the command Phase?</div>
test.txt · Last modified: 2021/08/26 14:26 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
