Differences

This shows you the differences between two versions of the page.

--- slice:qt:firmware [2019/03/01 00:30] – [Connecting to Host PC] Michael Radunsky
+++ slice:qt:firmware [2020/03/24 00:32] – [Firmware Update Instructions] Michael Radunsky
@@ Line 9: / Line 9: @@
     * [[slice:qt:api|SLICE-QT API]]
     * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]]
+    * [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|Firmware download ftp site]]
 =====Firmware Update Instructions=====
-| {{ :warning-sign.png?125&nolink }}  | For SLICE-QT firmware versions 1.29 and lower, updating the firmware will reset all stored parameters (PID loop parameters, etc.).  Before beginning a firmware update, manually record all settings for all channels. Versions 1.30 and higher will automatically store this information.  |
+Firmware update instructions can be found at [[https://github.com/Vescent|this link]].
 ====Connecting to Host PC====
   - Create a folder on your PC named C:\Vescent\SLICE-QT\SLICE-QT-0001.
-  - Copy the latest firmware update .zip file from the [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|github ftp website] into the folder created in step 1. It will contain the latest firmware and GUI revisions.\\ The zipped file will contain a .dfu file (System Controller firmware) and will be named SystemController-x-x.dfu where x-x  will be the version number of the firmware and a .hex file named 90-00001-upgrade-QT-x-x.hex where x-x  will be the version number of the firmware.
+  - Copy the latest firmware update .zip file from the [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|github ftp website]] into the folder created in step 1. It will contain the latest firmware and GUI revisions.\\ The zipped file will contain a .dfu file (System Controller firmware) and will be named SystemController-x-x.dfu where x-x  will be the version number of the firmware and a .hex file named 90-00001-upgrade-QT-x-x.hex where x-x  will be the version number of the firmware.
   - Intentionally left blank.
   - Determine the COM port number for the SLICE unit’s USB connection. (You can skip this step if you already know which COM port is assigned to your SLICE unit.)