User Tools

Site Tools


slice:qt:api

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
slice:qt:api [2019/10/31 13:57]
Michael Radunsky [Thermistor Settings]
slice:qt:api [2019/10/31 14:01] (current)
Michael Radunsky [Thermistor Settings]
Line 110: Line 110:
 ---- ----
 <​function=ICEfunc|0=Beta&​1=I:​CHANNEL:​2;​F:​VALUE:​3450&​2=3450.0&​-1>​ <​function=ICEfunc|0=Beta&​1=I:​CHANNEL:​2;​F:​VALUE:​3450&​2=3450.0&​-1>​
-For the B-parameter thermistor model: Sets the Beta coefficient in Kelvin [K] to VALUE for CHANNEL. Returns **Beta?**. Execute a TEMPLUT command after setting Beta through the API (QC firmware versions 1.14 & lower).+For the B-parameter thermistor model: Sets the Beta coefficient in Kelvin [K] to VALUE for CHANNEL. Returns **Beta?**.  When a new Beta-parameter is set, new Steinhart-Hart coefficients are calculated. Execute a TEMPLUT command after setting Beta through the API (QC firmware versions 1.14 & lower).
 ---- ----
 <​function=ICEfunc|0=RefTemp?&​1=I:​CHANNEL:​1&​2=25.0&​-1>​ <​function=ICEfunc|0=RefTemp?&​1=I:​CHANNEL:​1&​2=25.0&​-1>​
Line 116: Line 116:
 ---- ----
 <​function=ICEfunc|0=RefTemp&​1=I:​CHANNEL:​2;​F:​VALUE:​25.0&​2=25.0&​-1>​ <​function=ICEfunc|0=RefTemp&​1=I:​CHANNEL:​2;​F:​VALUE:​25.0&​2=25.0&​-1>​
-For the B-parameter thermistor model: Sets the Reference Temperature in degrees Celsius [˚C] to VALUE for CHANNEL. Returns **RefTemp?​**. Execute a TEMPLUT command after setting the Reference Temperature through the API (QC firmware versions 1.14 & lower).+For the B-parameter thermistor model: Sets the Reference Temperature in degrees Celsius [˚C] to VALUE for CHANNEL. Returns **RefTemp?​**. When a new Reference Temperature is set, new Steinhart-Hart coefficients are calculated. Execute a TEMPLUT command after setting the Reference Temperature through the API (QC firmware versions 1.14 & lower).
 ---- ----
 <​function=ICEfunc|0=RefRes?&​1=I:​CHANNEL:​1&​2=10000.0&​-1>​ <​function=ICEfunc|0=RefRes?&​1=I:​CHANNEL:​1&​2=10000.0&​-1>​
Line 143: Line 143:
 ---- ----
 <​function=ICEfunc|0=TEMPLUT&​1=I:​CHANNEL:​1&​2=&​-1>​ <​function=ICEfunc|0=TEMPLUT&​1=I:​CHANNEL:​1&​2=&​-1>​
-Forces recalculation of T = ƒ(A,B,C) lookup table. ​ There is no output from this command. ​ Execute this command after setting any of the Steinhart-Hart coefficients,​ Beta Parameter, or Reference Temperature via the API (QC firmware versions 1.14 & lower).+Forces recalculation of T = ƒ(A,B,C) lookup table. ​ There is no output from this command. ​ Execute this command after setting any of the Steinhart-Hart coefficients,​ Beta-parameter, or Reference Temperature via the API (QC firmware versions 1.14 & lower).
 ---- ----
 ===== Loop Filter Settings ===== ===== Loop Filter Settings =====
slice/qt/api.txt · Last modified: 2019/10/31 14:01 by Michael Radunsky