Product Manuals

User Tools

Site Tools

You are here: manuals » slice » qt » api
slice:qt:api

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
slice:qt:api [2019/10/31 20:55] – [Thermistor Settings] Michael Radunskyslice:qt:api [2019/10/31 20:57] – [Thermistor Settings] Michael Radunsky
Line 143: Line 143:
 ---- ----
 <function=ICEfunc|0=TEMPLUT&1=I:CHANNEL:1&2=&-1> <function=ICEfunc|0=TEMPLUT&1=I:CHANNEL:1&2=&-1>
-Forces recalculation of T = ƒ(A,B,C) lookup table.  There is no output from this command.  Execute this command after setting any of the Steinhart-Hart coefficients via the API (QC firmware versions 1.14 & lower).+Forces recalculation of T = ƒ(A,B,C) lookup table.  There is no output from this command.  Execute this command after setting any of the Steinhart-Hart coefficients, Beta Parameter, or Reference Temperature via the API (QC firmware versions 1.14 & lower).
 ---- ----
 ===== Loop Filter Settings ===== ===== Loop Filter Settings =====
slice/qt/api.txt · Last modified: 2023/12/06 20:33 by Christiana Sasser