Differences

This shows you the differences between two versions of the page.

--- slice:qt:api [2019/06/05 15:52] – [SLICE-QT API] Michael Radunsky
+++ slice:qt:api [2019/06/05 15:53] – Michael Radunsky
@@ Line 6: / Line 6: @@
 *  **Electronics**
-    * [[slice:qt|SLICE-QT Manual]]
+    * [[slice:qt|SLICE-QTC Manual]]
     * [[slice:qt:firmware|SLICE-QTC firmware upgrade instructions]]
 *  **Websites**
-    * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]]
+    * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QTC web page]]
     * [[https://github.com/Vescent|Github page for SLICE-QTC GUI]]
     * [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|Github page for SLICE-QTC firmware revisions]]
@@ Line 35: / Line 35: @@
   - [Int] refers to an integer argument that has no decimal point.
   - [Float] refers to a floating point argument that has a decimal point in its value.
-===== SLICE-QT Specific Notes =====
+===== SLICE-QTC Specific Notes =====
   - Valid values for the CHANNEL argument are {1, 2, 3, 4}.
   - All enable commands use an integer argument to convey the state: 0 = Off, 1 = On.