Differences

This shows you the differences between two versions of the page.

--- slice:qt:api [2019/02/19 00:23] – [I/O Channel Settings] Kurt Vogel
+++ slice:qt:api [2019/05/03 00:58] – [Links] Michael Radunsky
@@ Line 1: / Line 1: @@
 ======SLICE-QT API======
-[[slice:qt|SLICE-QT Manual]]
+====Links====
+* **Quick-Start Guides**
+    * [[slice:quick_start_qt|SLICE-QTC Quick Start]]
+*  **Electronics**
+    * [[slice:qt|SLICE-QT Manual]]
+    * [[slice:qt:firmware|SLICE-QTC firmware upgrade instructions]]
+*  **Websites**
+    * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]]
+    * [[https://github.com/Vescent|Github page for SLICE-QTC GUI]]
+    * [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|Github page for SLICE-QTC firmware revisions]]
 =====Implementation Instructions=====
@@ Line 129: / Line 139: @@
 For the Steinhart-Hart thermistor model: Returns the C coefficient for CHANNEL.
 ----
-<function=ICEfunc|0=TCoefB&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
+<function=ICEfunc|0=TCoefC&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
 For the Steinhart-Hart thermistor model: Sets the C coefficient to VALUE for CHANNEL. Returns **TCoefC?**.
 ----
@@ Line 198: / Line 208: @@
 Sets the On/Off STATE of the slew rate limiter for CHANNEL. Returns **SlewEn?**.
 ----
-===== I/O Channel Settings =====
+===== I/O Channel Settings (Not yet implemented 27 Feb, 2019) =====
 ----
 ^  Output Function   ^  CHANNEL  ^  FUNCTION  ^  VALUE1      ^  VALUE2      ^