Differences

This shows you the differences between two versions of the page.

--- slice:qt:api [2019/02/19 00:23] – [I/O Channel Settings] Kurt Vogel
+++ slice:qt:api [2019/02/21 15:44] – [SLICE-QT API] Michael Radunsky
@@ Line 1: / Line 1: @@
 ======SLICE-QT API======
-[[slice:qt|SLICE-QT Manual]]
+====Links====
+* **Quick-Start Guides**
+    * [[slice:quick_start_qt|SLICE-QT Quick Start]]
+*  **Electronics**
+    * [[slice:qt|SLICE-QT Manual]]
+    * [[slice:qt:firmware|SLICE-QT firmware upgrade instructions]]
+*  **Websites**
+    * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]]
 =====Implementation Instructions=====
@@ Line 129: / Line 137: @@
 For the Steinhart-Hart thermistor model: Returns the C coefficient for CHANNEL.
 ----
-<function=ICEfunc|0=TCoefB&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
+<function=ICEfunc|0=TCoefC&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
 For the Steinhart-Hart thermistor model: Sets the C coefficient to VALUE for CHANNEL. Returns **TCoefC?**.
 ----