Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
slice:qt [2019/12/04 20:04] – [Proper Usage] Michael Radunsky | slice:qt [2020/07/30 16:12] – [System Settings] Michael Radunsky |
---|
| Compatible Transducer | TEC or resistive heater | | | Compatible Transducer | TEC or resistive heater | |
| Compatible Sensor | NTC thermistor ((Nominal value 10 kΩ at room temperature. Precision at temperatures removed from room temperature can be improved by selecting a thermistor whose resistance is ~10 kΩ near the target temperature.)) | | | Compatible Sensor | NTC thermistor ((Nominal value 10 kΩ at room temperature. Precision at temperatures removed from room temperature can be improved by selecting a thermistor whose resistance is ~10 kΩ near the target temperature.)) | |
| Temperature Stability | ±0.2 mK over 1 hour((Plant-dependent; value specified for D2-100 laser)) | | | Temperature Stability | ±0.2 mK over 10 min((Plant-dependent; value specified for D2-100 laser)) | |
| Precision | ~1 mK | | | Precision | ~1 mK | |
| Control Capacity | 40 W total((User-distributable over four channels)) \\ 20 W max for a single channel | | | Control Capacity | 40 W total((User-distributable over four channels)) \\ 20 W max for a single channel | |
The User can limit the control power available to individual channels. To adjust control capacity from the Home screen, select CH X > Settings > Load Limits and the screen shown in <imgref power> will appear. | The User can limit the control power available to individual channels. To adjust control capacity from the Home screen, select CH X > Settings > Load Limits and the screen shown in <imgref power> will appear. |
| |
<imgcaption power|Screen for adjustment of control power capacity>{{ :slice:slice-qt_load_limits_screen.jpg?400x254 |}}</imgcaption> | <imgcaption power|Screen for adjustment of control power capacity>{{ :slice:slice-qt_load_limits_screen.png?400x254 |}}</imgcaption> |
| |
=== Transducer and Thermistor === | === Transducer and Thermistor === |
Current firmware versions are reported here. | Current firmware versions are reported here. |
| |
<WRAP center round box 60%><tabcaption firmware_rev |Most recent firmware versions as of 6 June 2019> | <WRAP center round box 60%><tabcaption firmware_rev |Most recent firmware versions as of July 2020> |
| Firmware | Version Level | Release Date | | | Firmware | Version Level | Release Date | |
| System Controller| 1.24| 23 May 2019| | | System Controller | 1.177 | March 2020 | |
| QTC| 1.38| 23 May 2019| | | QTC | 1.52 | July 2020 | |
</tabcaption></WRAP> | </tabcaption></WRAP> |
From time to time, Vescent will upgrade the firmware for controlling the SLICE-QTC. The procedure to upgrade the firmware is given [[slice:qt:firmware|here]]. | From time to time, Vescent will upgrade the firmware for controlling the SLICE-QTC. The procedure to upgrade the firmware is given [[slice:qt:firmware|here]]. |