User Tools

Site Tools


slice:opl

SLICE-OPL Offset Phase Lock Servo

Model No. SLICE-OPL

Document Revision: 1

Document Last Updated on 2023/05/01 19:05

Please read Limited Warranty and General Warnings and Cautions prior to operating the SLICE-OPL.

Click here for the main manuals page.
Click here for the SLICE-OPL API.
Click here for the SLICE-OPL web page.
Click here for the Github page for SLICE-OPL GUI
Click here for the Github page for SLICE-OPL firmware revisions
Please check back for added functionality. Contact sales [at] vescent [dot] com for questions and corrections, or to request added functionality.

List of Warning Symbols

Warning. Pay special attention to procedures and notes. If procedure is not followed carefully, damage to the SLICE-(D)LC or devices connected to it may occur.
Potential for electrical shock hazard.

The SLICE-OPL Offset Phase Lock Servo is intended for controlling lasers. When using lasers particular care must be given to avoid exposure hazards.

slice/opl.txt · Last modified: 2023/05/01 20:05 by 127.0.0.1