Differences

This shows you the differences between two versions of the page.

--- slice:dcc [2019/09/24 22:13] – [Error States] Michael Radunsky
+++ slice:dcc [2019/12/13 21:31] – [Programmable Input] Michael Radunsky
@@ Line 265: / Line 265: @@
 <imgcaption io_input|Input choice for front-panel input>{{ :slice:dcc:i-o_input_equals_modulation.png?430x254 |}}</imgcaption>
-At present (Aug, 2019), the only input option is a modulation signal.  The SLICE-DCC can respond to a modulation or control signal over a bandwidth of DC to 1 MHz.
+The only input option is a modulation signal.  The SLICE-DCC can respond to a modulation or control signal over a bandwidth of DC to 1 MHz.  Only one of the two modulation input ports (rear-panel SMA, <imgref back>, item 9 or front-panel BNC, <imgref front>, item 2) can be active at any given time.
 ==== Programmable Output ====