User Tools

Site Tools


ice:servo-sc1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ice:servo-sc1 [2018/12/19 16:54]
Michael Radunsky [Specifications]
ice:servo-sc1 [2018/12/19 16:56] (current)
Michael Radunsky
Line 29: Line 29:
 ^ ^  ICE-SC1 ​ ^  Units  ^ ^ ^  ICE-SC1 ​ ^  Units  ^
 ^ Side Lock Servo ^ ^^ ^  ^ Side Lock Servo ^ ^^ ^ 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Bandwidth((Calculated based on RF dither frequency of 4 MHz which limits servo bandwidth))| ​ 1   ​| ​ MHz  | +|Bandwidth((Calculated based on RF dither frequency of 4 MHz which limits servo bandwidth))| ​ 1   ​| ​ MHz  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Input Impedance |  50  |  Ω  | +|Input Impedance |  50  |  Ω  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Input Range |  ±10  |  V  | +|Input Range |  ±10  |  V  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Dither Frequency((Not implemented as of November, 2017)) |  4  |  MHz  | +|Dither Frequency((Not implemented as of November, 2017)) |  4  |  MHz  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Phase Shift Resolution((Not implemented as of November, 2017)) |  5.6  |  deg  | +|Phase Shift Resolution((Not implemented as of November, 2017)) |  5.6  |  deg  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Input Voltage Noise(( Referenced to 50Ω load)) |  TBD  |  nV/√Hz |+|Input Voltage Noise(( Referenced to 50Ω load)) |  TBD  |  nV/√Hz |
 ^ Ramp Parameters ^ ^^ ^ ^ Ramp Parameters ^ ^^ ^
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Max. Ramp Amplitude |  ±10  |  V  |+|Max. Ramp Amplitude |  ±10  |  V  |
 ^ Loop Filter Parameters ^ ^^ ^ ^ Loop Filter Parameters ^ ^^ ^
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​DC Offset Range |  ±10  |  V  | +|DC Offset Range |  ±10  |  V  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Proportional Gain (ref to DC Error) |  -38 to +30  |  dB  | +|Proportional Gain (ref to DC Error) |  -38 to +30  |  dB  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Proportional Gain Resolution |  2  |  dB  | +|Proportional Gain Resolution |  2  |  dB  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​First Integrator| ​ 0.030 - 175    |  kHz  | +|First Integrator| ​ 0.030 - 175    |  kHz  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Second Integrator| ​ 0.30 - 1,750    |  kHz  | +|Second Integrator| ​ 0.30 - 1,750    |  kHz  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Differential| ​ 0.1 - 10,​000 ​ |  kHz  | +|Differential| ​ 0.1 - 10,​000 ​ |  kHz  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Differential Gain |  18  |  dB  | +|Differential Gain |  18  |  dB  | 
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Output Range |  ±10  |  V  |+|Output Range |  ±10  |  V  |
 ^ Output Control ^ ^^ ^ ^ Output Control ^ ^^ ^
-|<​html>​ &​nbsp;&​nbsp;​ </​html>​Adjustable Output Limits |  ±10  |  V  |+|Adjustable Output Limits |  ±10  |  V  |
  
 ^Electrical Specifications^^^^^ ^Electrical Specifications^^^^^
ice/servo-sc1.txt · Last modified: 2018/12/19 16:56 by Michael Radunsky