This is an old revision of the document!
Table of Contents
Servo Controller
Model No. ICE-SC1
Document Revision: 1.0
Document Last Updated on 2021/08/26 14:26
Please read Limited Warranty and General Warnings and Cautions prior to operating the ICE-SC1.
Description
General purpose Servo Controller with PI2D loop filter. Secondary auxiliary output is pure integerator of primary output. Both primary output and aux output have min / max settings and adjustable offset. This product is currently in development and all specifications subject to change.
Absolute Maximum Ratings
Note: All modules designed to be operated in laboratory environment
Parameter | Rating |
---|---|
Environmental Temperature | >15°C and <30°C |
Environmental Humidity | <60% |
Environmental Dew Points | <15°C |
Specifications
ICE-SC1 | Units | ||
---|---|---|---|
Peak Lock Servo | |||
<html> </html>Bandwidth1) | 3 | MHz | |
<html> </html>Input Impedance | 50 | Ω | |
<html> </html>Dither Frequency | 4 | MHz | |
<html> </html>Phase Shift Resolution | 5.6 | deg | |
<html> </html>Input Voltage Noise2) | TBD | nV/ <HTML> √Hz </HTML> | |
Loop Filter Parameters | |||
<html> </html>Proportional Gain (ref to DC Error) | -38 to +30 | dB | |
<html> </html>Proportional Gain Resolution | 2 | dB | |
<html> </html>First Integrator | 0.030 - 175 | kHz | |
<html> </html>Second Integrator | 0.30 - 1,750 | kHz | |
<html> </html>Differential | 0.1 - 10,000 | kHz | |
<html> </html>Differential Gain | 18 | dB |
I/O (ICE-BOX)
Only when purchased with the ICE-Box.
The Front Panel for the ICE-SC1 has three SMA connectors. Top: Error In; Middle: Aux Out; Bottom: Primary Out.
Error In
SMA input for the error signal.
Aux Out
SMA output for the Auxiliary servo.
Servo Out
SMA output for the Primary servo.