Differences

This shows you the differences between two versions of the page.

--- ice:quadtemp [2016/07/11 17:39] – [Description] Michael Radunsky
+++ ice:quadtemp [2016/07/11 21:20] – [Description] Michael Radunsky
@@ Line 11: / Line 11: @@
 ===== Description =====
-The Quad Temperature Controller Board (ICE-QT1) provides 4 independent PID temperature servo loops capable of sub-mK stability.((The ICE-QT1 has non-adjustable poles.  They have been set appropriately for Vescent D2-100 DBR lasers and for Photodigm Mercury lasers.)) Each channel can drive either a single TEC (bipolar current output) or resistive heater (unipolar current output) and read a single 10k thermistor.
+The Quad Temperature Controller Board (ICE-QT1) provides 4 independent PID temperature servo loops capable of sub-mK stability.((The ICE-QT1 has non-adjustable poles.  They have been set appropriately for Vescent D2-100 DBR lasers and for Photodigm Mercury lasers. /* Sub-mK stability requires a proper thermal design and proper tuning of the temperature controller to the thermal plant. If you did not purchase the Laser Controller with a Laser Diode, please read the section on tuning the temperature controller. */)) Each channel can drive either a single TEC (bipolar current output) or resistive heater (unipolar current output) and read a single 10k thermistor.
 ===== Absolute Maximum Ratings =====
 Note: All modules designed to be operated in laboratory environment