Product Manuals

User Tools

Site Tools

You are here: manuals » ice » commands » servo
ice:commands:servo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
ice:commands:servo [2017/10/27 17:40] – Michael Radunskyice:commands:servo [2017/10/27 17:49] – Michael Radunsky
Line 5: Line 5:
  
 <function=ICEfunc|0=PHASE?&2=58&3=TBD> <function=ICEfunc|0=PHASE?&2=58&3=TBD>
-Returns the phase shift (in degrees) on the dither signal modulating the laser current.+Returns the phase shift (in degrees) on the dither signal modulating the laser current.((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
 <function=ICEfunc|0=PHASE&1=F:PHASE:23&2=22.5&3=TBD> <function=ICEfunc|0=PHASE&1=F:PHASE:23&2=22.5&3=TBD>
-Sets the phase shift to PHASE (in degrees) on the dither signal modulating the laser current. Returns the output of the command **Phase?**+Sets the phase shift to PHASE (in degrees) on the dither signal modulating the laser current. Returns the output of the command **Phase?**((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
 <function=ICEfunc|0=DitherA?&2=32&3=TBD> <function=ICEfunc|0=DitherA?&2=32&3=TBD>
-Returns the amplitude of the dither on the laser current. Output is integer from 0-255.+Returns the amplitude of the dither on the laser current. Output is integer from 0-255.((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
 <function=ICEfunc|0=DitherA&1=I:AMP:35;&2=35&3=TBD> <function=ICEfunc|0=DitherA&1=I:AMP:35;&2=35&3=TBD>
-Sets the amplitude of the current modulation to AMP.  AMP is an integer ranging from 0 – 255. Command returns the output of the command **DitherA?**+Sets the amplitude of the current modulation to AMP.  AMP is an integer ranging from 0 – 255. Command returns the output of the command **DitherA?**((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
 <function=ICEfunc|0=Dither?&2=On&3=TBD> <function=ICEfunc|0=Dither?&2=On&3=TBD>
-Returns the status of the dither on the laser current (on or off).+Returns the status of the dither on the laser current (on or off).((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
 <function=ICEfunc|0=Dither&1=A:On/Off:On;&2=On&3=TBD> <function=ICEfunc|0=Dither&1=A:On/Off:On;&2=On&3=TBD>
-Enables or disables the dither on the laser current. Valid arguments are On or Off.  Returns the output of the command **Dither?**.+Enables or disables the dither on the laser current. Valid arguments are On or Off.  Returns the output of the command **Dither?**.((Not implemented as of November, 2017))
 <html></div></html> <html></div></html>
  
ice/commands/servo.txt · Last modified: 2023/12/06 20:44 by Christiana Sasser