ice:commands:lasercurrent
This is an old revision of the document!
Common Laser Controller Command Set
List of common commands for controlling the laser controller in both the Peak Lock Servo and Peak Lock Servo & Current Controller and the Offset Phase Lock Servo & Current Controller.
Arguments:
No Arguments Taken
Example:
On
I2C Command Number: 16
Description
Returns the status of the laser (on, off or fault). <html></div></html>
Arguments:
No Arguments Taken
Example:
I2C Command Number:
Description
Turns the laser on or off. Valid arguments are ON or OFF. Only turns the laser on when no fault / interlock issues. Returns the output from the Laser? command. <html></div></html>ice/commands/lasercurrent.1387230899.txt.gz · Last modified: 2021/08/26 14:26 (external edit)