Differences

This shows you the differences between two versions of the page.

--- ffc:locking_electronics:slice-fpga-ii [2023/08/08 22:20] – external edit 127.0.0.1
+++ ffc:locking_electronics:slice-fpga-ii [2023/08/09 00:20] (current) – external edit 127.0.0.1
@@ Line 104: / Line 104: @@
   * If you received your SLICE FPGA prior to 7/20/23, ensure “Push default values to Red Pitaya” is selected and press OK.
-  * If you received your SLICE FPGA after 7/20/23, ensure the center option is selected, labeled "Connect to a Red Pitaya with its current settings".
+  * If you received your SLICE FPGA after 7/20/23, ensure the center option is selected, labeled "Connect to a Red Pitaya with its current settings". If the default values of your SLICE FPGA II have been overwritten, the original values can be recovered by importing the XML file titled with your devices serial number. To do this, once connected to the FPGA, open the settings tab. In the Settings Management window enter the proper filename corresponding to your FFC serial number, and click "Import All Settings from File" (<imgref startup>).
+<imgcaption startup|Start-up Menu>{{ :ffc:locking_electronics:fpga_xml_import.png?200 |}}</imgcaption>
 =====FPGA Control=====