Product Manuals

User Tools

Site Tools

You are here: manuals » fcc » 100 » api
fcc:100:api

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
fcc:100:api [2021/10/18 22:50] – external edit 127.0.0.1fcc:100:api [2021/10/18 23:17] – external edit 127.0.0.1
Line 42: Line 42:
 For most complete version of API, download the FFC-Serial API PDF from the [[fcc:100:api#Links|downloads]] section. For most complete version of API, download the FFC-Serial API PDF from the [[fcc:100:api#Links|downloads]] section.
  
-=====New Table=====+=====General Commands=====
 <function=ICEfunc|0=#Version&1=&2=255.255 255.255 0.16 65535 (0.16 is version)&-1> <function=ICEfunc|0=#Version&1=&2=255.255 255.255 0.16 65535 (0.16 is version)&-1>
 Returns firmware version of master board where arguments are used as follows: Returns firmware version of master board where arguments are used as follows:
Line 56: Line 56:
 Returns the touch screen backlight setting Returns the touch screen backlight setting
 ---- ----
-<function=ICEfunc|0=#Scbklt&1=I: level  (0 – 20):3&2=#SCBKLT 3&-1>+<function=ICEfunc|0=#Scbklt&1=I:level  (0 – 20) :3&2=#SCBKLT 3&-1>
 Sets the touch screen backlight setting to the level given as an argument Sets the touch screen backlight setting to the level given as an argument
 ---- ----
Line 62: Line 62:
 Returns the touch screen and rotary knob audio feedback volume Returns the touch screen and rotary knob audio feedback volume
 ---- ----
-<function=ICEfunc|0=#Scvol&1=I: level  (0 – 20):8&2=#SCVOL 8&-1>+<function=ICEfunc|0=#Scvol&1=I:level  (0 – 20) :8&2=#SCVOL 8&-1>
 Sets the touch screen and rotary knob audio feedback volume Sets the touch screen and rotary knob audio feedback volume
 ---- ----
-<function=ICEfunc|0=*IDN?&1=&2=Vescent Photonics,FFC,[serial#],S-[version],FL-[version],LD-[version],LD-[version]&-1>+<function=ICEfunc|0= *IDN?&1=&2=Vescent Photonics,FFC,[serial#],S-[version],FL-[version],LD-[version],LD-[version]&-1>
 Returns the Manufacturer, Model, Serial Number, Board Firmware Versions  of the device Returns the Manufacturer, Model, Serial Number, Board Firmware Versions  of the device
 ---- ----
-<function=ICEfunc|0=*RST&1=&2=Resetting System&-1>+<function=ICEfunc|0= *RST&1=&2=Resetting System&-1>
 Restarts the device (power cycle) Restarts the device (power cycle)
 ---- ----
Line 79: Line 79:
  
  
-=====New Table=====+=====Control API=====
 <function=ICEfunc|0=MSTRCTL?&1=&2=MSTRCTL? 0&-1> <function=ICEfunc|0=MSTRCTL?&1=&2=MSTRCTL? 0&-1>
 Returns the enumerated operating mode of the FFC Returns the enumerated operating mode of the FFC
Line 87: Line 87:
 2 = LASER ON 2 = LASER ON
 ---- ----
-<function=ICEfunc|0=MSTRCTL&1=I: MODE:1&2=MSTRCTL 1&-1>+<function=ICEfunc|0=MSTRCTL&1=I:MODE :1&2=MSTRCTL 1&-1>
 Returns the enumerated operating mode of the FFC Returns the enumerated operating mode of the FFC
 Where: Where:
Line 104: Line 104:
 3 = Temperature Control Mode ON 3 = Temperature Control Mode ON
 ---- ----
-<function=ICEfunc|0=CATCTRL&1=I: State   :1&2=CATCTRL 1&-1>+<function=ICEfunc|0=CATCTRL&1=I:State    :1&2=CATCTRL 1&-1>
 Sets the operating status of the Cavity Temperature Control Sets the operating status of the Cavity Temperature Control
 Where: Where:
Line 121: Line 121:
 3 = Temperature Control Mode ON 3 = Temperature Control Mode ON
 ---- ----
-<function=ICEfunc|0=OSTCTRL&1=I: State:3&2=OSTCTRL 3&-1>+<function=ICEfunc|0=OSTCTRL&1=I:State :3&2=OSTCTRL 3&-1>
 Sets the operating status of the Oscillator Temperature Control Sets the operating status of the Oscillator Temperature Control
 Where: Where:
Line 139: Line 139:
 3 = Temperature Control Mode ON 3 = Temperature Control Mode ON
 ---- ----
-<function=ICEfunc|0=AMTCTRL&1=I: State :1&2=AMTCTRL 1&-1>+<function=ICEfunc|0=AMTCTRL&1=I:State  :1&2=AMTCTRL 1&-1>
 Sets the operating status of the Amplifier Temperature Control Sets the operating status of the Amplifier Temperature Control
 Where: Where:
Line 163: Line 163:
  
  
-=====New Table=====+=====Temperature Controls=====
 <function=ICEfunc|0=CATSETP?&1=&2=CATSETP? 20.3&-1> <function=ICEfunc|0=CATSETP?&1=&2=CATSETP? 20.3&-1>
 Returns the temperature setpoint for the Cavity Temperature Control Returns the temperature setpoint for the Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CATSETP&1=F: Temperature :24.5&2=CATSETP 24.5&-1>+<function=ICEfunc|0=CATSETP&1=F:Temperature  :24.5&2=CATSETP 24.5&-1>
 Sets the temperature setpoint for the Cavity Temperature Control Sets the temperature setpoint for the Cavity Temperature Control
 Returns CATSETP? Returns CATSETP?
Line 181: Line 181:
 Returns the temperature setpoint for the Amplifier Temperature Control Returns the temperature setpoint for the Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMTSETP&1=F: Temperature :24.5&2=AMTSETP 24.5&-1>+<function=ICEfunc|0=AMTSETP&1=F:Temperature  :24.5&2=AMTSETP 24.5&-1>
 Sets the temperature setpoint for the Amplifier Temperature Control Sets the temperature setpoint for the Amplifier Temperature Control
 Returns AMTSETP? Returns AMTSETP?
Line 212: Line 212:
 Reads the Thermistor Beta Coefficient for Cavity Temperature Control Reads the Thermistor Beta Coefficient for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVBETA&1=F: Coefficient :3500&2=CAVBETA 3500&-1>+<function=ICEfunc|0=CAVBETA&1=F:Coefficient:3500&2=CAVBETA 3500&-1>
 Sets the Thermistor Beta Coefficient for Cavity Temperature Control Sets the Thermistor Beta Coefficient for Cavity Temperature Control
 Returns CAVBETA? Returns CAVBETA?
Line 219: Line 219:
 Reads the Thermistor Beta Coefficient for Oscillator Temperature Control Reads the Thermistor Beta Coefficient for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSCBETA&1=F: Coefficient:3500&2=OSCBETA 3500&-1>+<function=ICEfunc|0=OSCBETA&1=F:Coefficient :3500&2=OSCBETA 3500&-1>
 Sets the Thermistor Beta Coefficient for Oscillator Temperature Control Sets the Thermistor Beta Coefficient for Oscillator Temperature Control
 Returns OSCBETA? Returns OSCBETA?
Line 226: Line 226:
 Reads the Thermistor Beta Coefficient for Amplifier Temperature Control Reads the Thermistor Beta Coefficient for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPBETA&1=F: Coefficient:3500&2=AMPBETA 3500&-1>+<function=ICEfunc|0=AMPBETA&1=F:Coefficient :3500&2=AMPBETA 3500&-1>
 Sets the Thermistor Beta Coefficient for Amplifier Temperature Control Sets the Thermistor Beta Coefficient for Amplifier Temperature Control
 Returns AMPBETA? Returns AMPBETA?
Line 233: Line 233:
 Reads the Thermistor Reference Temperature for Cavity Temperature Control Reads the Thermistor Reference Temperature for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVREFT&1=F: Temperature :20&2=CAVREFT 20&-1>+<function=ICEfunc|0=CAVREFT&1=F:Temperature  :20&2=CAVREFT 20&-1>
 Sets the Thermistor Reference Temperature for Cavity Temperature Control Sets the Thermistor Reference Temperature for Cavity Temperature Control
 Returns CAVREFT? Returns CAVREFT?
Line 240: Line 240:
 Reads the Thermistor Reference Temperature for Oscillator Temperature Control Reads the Thermistor Reference Temperature for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSCREFT&1=F: Temperature :20&2=OSCREFT 20&-1>+<function=ICEfunc|0=OSCREFT&1=F:Temperature  :20&2=OSCREFT 20&-1>
 Sets the Thermistor Reference Temperature for Oscillator Temperature Control Sets the Thermistor Reference Temperature for Oscillator Temperature Control
 Returns OSCREFT? Returns OSCREFT?
Line 247: Line 247:
 Reads the Thermistor Reference Temperature for Amplifier Temperature Control Reads the Thermistor Reference Temperature for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPREFT&1=F: Temperature  :20&2=AMPREFT 20&-1>+<function=ICEfunc|0=AMPREFT&1=F:Temperature   :20&2=AMPREFT 20&-1>
 Sets the Thermistor Reference Temperature for Amplifier Temperature Control Sets the Thermistor Reference Temperature for Amplifier Temperature Control
 Returns AMPREFT? Returns AMPREFT?
Line 256: Line 256:
  
 ---- ----
-<function=ICEfunc|0=CAVREFR&1=F: Resistance :30000&2=CAVREFR 30000&-1>+<function=ICEfunc|0=CAVREFR&1=F:Resistance  :30000&2=CAVREFR 30000&-1>
 Sets the Thermistor Reference Resistor for Cavity Temperature Control Sets the Thermistor Reference Resistor for Cavity Temperature Control
 Returns CAVREFR? Returns CAVREFR?
Line 263: Line 263:
 Reads the Thermistor Reference Resistor for Oscillator Temperature Control Reads the Thermistor Reference Resistor for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSCREFR&1=F: Resistance :30000&2=OSCREFR 30000&-1>+<function=ICEfunc|0=OSCREFR&1=F:Resistance  :30000&2=OSCREFR 30000&-1>
 Sets the Thermistor Reference Resistor for Oscillator Temperature Control Sets the Thermistor Reference Resistor for Oscillator Temperature Control
 Returns OSCREFR? Returns OSCREFR?
Line 270: Line 270:
 Reads the Thermistor Reference Resistor for Amplifier Temperature Control Reads the Thermistor Reference Resistor for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPREFR&1=F: Resistance :30000&2=AMPREFR 30000&-1>+<function=ICEfunc|0=AMPREFR&1=F:Resistance  :30000&2=AMPREFR 30000&-1>
 Sets the Thermistor Reference Resistor for Amplifier Temperature Control Sets the Thermistor Reference Resistor for Amplifier Temperature Control
 Returns AMPREFR? Returns AMPREFR?
Line 278: Line 278:
  
 ---- ----
-<function=ICEfunc|0=CAVCOFA&1=F: Coefficient A :0.000722&2=CAVCOFA 0.000722&-1>+<function=ICEfunc|0=CAVCOFA&1=F:Coefficient A :0.000722&2=CAVCOFA 0.000722&-1>
 Sets the Steinhart-Hart A Thermistor coefficient for Cavity Temperature Control Sets the Steinhart-Hart A Thermistor coefficient for Cavity Temperature Control
 Returns CAVCOFA? Returns CAVCOFA?
Line 286: Line 286:
 Reads the Steinhart-Hart B Thermistor coefficient for Cavity Temperature Control Reads the Steinhart-Hart B Thermistor coefficient for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVCOFB&1=F:   Coefficient B:0.000286&2=CAVCOFB 0.000286&-1>+ 
 +<function=ICEfunc|0=CAVCOFB&1=F:Coefficient B:0.000286&2=CAVCOFB 0.000286&-1>
 Sets the Steinhart-Hart B Thermistor coefficient for Cavity Temperature Control Sets the Steinhart-Hart B Thermistor coefficient for Cavity Temperature Control
 Returns CAVCOFB? Returns CAVCOFB?
 ---- ----
- 
 <function=ICEfunc|0=CAVCOFC?&1=&2=CAVCOFC? 0.000000&-1> <function=ICEfunc|0=CAVCOFC?&1=&2=CAVCOFC? 0.000000&-1>
 Reads the Steinhart-Hart C Thermistor coefficient for Cavity Temperature Control Reads the Steinhart-Hart C Thermistor coefficient for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVCOFC&1=F:   Coefficient C:0.000001&2=CAVCOFC 0.000001&-1>+<function=ICEfunc|0=CAVCOFC&1=F:Coefficient C:0.000001&2=CAVCOFC 0.000001&-1>
 Sets the Steinhart-Hart C Thermistor coefficient for Cavity Temperature Control Sets the Steinhart-Hart C Thermistor coefficient for Cavity Temperature Control
 Returns CAVCOFC? Returns CAVCOFC?
Line 301: Line 301:
 Reads the Steinhart-Hart A Thermistor coefficient for Oscillator Temperature Control Reads the Steinhart-Hart A Thermistor coefficient for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSCCOFA&1=F:   Coefficient A:0.000684&2=OSCCOFA 0.000684&-1>+<function=ICEfunc|0=OSCCOFA&1=F:Coefficient A:0.000684&2=OSCCOFA 0.000684&-1>
 Sets the Steinhart-Hart A Thermistor coefficient for Oscillator Temperature Control Sets the Steinhart-Hart A Thermistor coefficient for Oscillator Temperature Control
 Returns OSCCOFA? Returns OSCCOFA?
Line 310: Line 310:
  
 ---- ----
-<function=ICEfunc|0=OSCCOFB&1=F:   Coefficient B:0.000286&2=OSCCOFB 0.000286&-1>+<function=ICEfunc|0=OSCCOFB&1=F:Coefficient B:0.000286&2=OSCCOFB 0.000286&-1>
 Sets the Steinhart-Hart B Thermistor coefficient for Oscillator Temperature Control Sets the Steinhart-Hart B Thermistor coefficient for Oscillator Temperature Control
 Returns OSCCOFB? Returns OSCCOFB?
Line 317: Line 317:
 Reads the Steinhart-Hart C Thermistor coefficient for Oscillator Temperature Control Reads the Steinhart-Hart C Thermistor coefficient for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSCCOFC&1=F:   Coefficient C:0.000001&2=OSCCOFC 0.000001&-1>+<function=ICEfunc|0=OSCCOFC&1=F:Coefficient C:0.000001&2=OSCCOFC 0.000001&-1>
 Sets the Steinhart-Hart C Thermistor coefficient for Oscillator Temperature Control Sets the Steinhart-Hart C Thermistor coefficient for Oscillator Temperature Control
 Returns OSCCOFC? Returns OSCCOFC?
Line 324: Line 324:
 Reads the Steinhart-Hart A Thermistor coefficient for Amplifier Temperature Control Reads the Steinhart-Hart A Thermistor coefficient for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPCOFA&1=F:   Coefficient A:0.000684&2=AMPCOFA 0.000684&-1>+<function=ICEfunc|0=AMPCOFA&1=F:Coefficient A:0.000684&2=AMPCOFA 0.000684&-1>
 Sets the Steinhart-Hart A Thermistor coefficient for Amplifier Temperature Control Sets the Steinhart-Hart A Thermistor coefficient for Amplifier Temperature Control
 Returns AMPCOFA? Returns AMPCOFA?
Line 331: Line 331:
 Reads the Steinhart-Hart B Thermistor coefficient for Amplifier Temperature Control Reads the Steinhart-Hart B Thermistor coefficient for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPCOFB&1=F:   Coefficient B:0.000286&2=AMPCOFB 0.000286&-1>+<function=ICEfunc|0=AMPCOFB&1=F:Coefficient B:0.000286&2=AMPCOFB 0.000286&-1>
 Sets the Steinhart-Hart B Thermistor coefficient for Amplifier Temperature Control Sets the Steinhart-Hart B Thermistor coefficient for Amplifier Temperature Control
 Returns AMPCOFB? Returns AMPCOFB?
Line 340: Line 340:
  
 ---- ----
-<function=ICEfunc|0=AMPCOFC&1=F:   Coefficient C :0.000001&2=AMPCOFC 0.000001&-1>+<function=ICEfunc|0=AMPCOFC&1=F:Coefficient C:0.000001&2=AMPCOFC 0.000001&-1>
 Sets the Steinhart-Hart C Thermistor coefficient for Amplifier Temperature Control Sets the Steinhart-Hart C Thermistor coefficient for Amplifier Temperature Control
 Returns AMPCOFC? Returns AMPCOFC?
Line 347: Line 347:
 Reads the Proportional gain for Cavity Temperature Control Reads the Proportional gain for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVPROP&1=F:   Proportional  Gain:7.500000&2=CAVPROP 7.500000&-1>+<function=ICEfunc|0=CAVPROP&1=F:Proportional Gain :7.500000&2=CAVPROP 7.500000&-1>
 Sets the Proportional gain for Cavity Temperature Control Sets the Proportional gain for Cavity Temperature Control
 Returns CAVPROP? Returns CAVPROP?
Line 354: Line 354:
 Reads the Integral gain for Cavity Temperature Control Reads the Integral gain for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAVINT&1=F:   Integral  Gain:2.0&2=CAVINT 2.0&-1>+<function=ICEfunc|0=CAVINT&1=F:Integral Gain:2.0&2=CAVINT 2.0&-1>
 Sets the Integral gain for Cavity Temperature Control Sets the Integral gain for Cavity Temperature Control
 Returns CAVINT? Returns CAVINT?
Line 362: Line 362:
  
 ---- ----
-<function=ICEfunc|0=CAVDERV&1=F:   Derivative:0.5&2=CAVDERV 0.5&-1>+<function=ICEfunc|0=CAVDERV&1=F:Derivative :0.5&2=CAVDERV 0.5&-1>
 Sets the Derivative term for Cavity Temperature Control Sets the Derivative term for Cavity Temperature Control
 Returns CAVDERV? Returns CAVDERV?
Line 370: Line 370:
  
 ---- ----
-<function=ICEfunc|0=OSCPROP&1=F:   Proportional  Gain:7.500000&2=OSCPROP 7.500000&-1>+<function=ICEfunc|0=OSCPROP&1=F:Proportional Gain :7.500000&2=OSCPROP 7.500000&-1>
 Sets the Proportional gain for Oscillator Temperature Control Sets the Proportional gain for Oscillator Temperature Control
 Returns OSCPROP? Returns OSCPROP?
Line 379: Line 379:
  
 ---- ----
-<function=ICEfunc|0=OSCINT&1=F:   Integral  Gain:2.0&2=OSCINT 2.0&-1>+<function=ICEfunc|0=OSCINT&1=F: Integral Gain :2.0&2=OSCINT 2.0&-1>
 Sets the Integral gain for Oscillator Temperature Control Sets the Integral gain for Oscillator Temperature Control
 Returns OSCINT? Returns OSCINT?
Line 388: Line 388:
  
 ---- ----
-<function=ICEfunc|0=OSCDERV&1=F:   Derivative:0.5&2=OSCDERV 0.5&-1>+<function=ICEfunc|0=OSCDERV&1=F:Derivative :0.5&2=OSCDERV 0.5&-1>
 Sets the Derivative term for Oscillator Temperature Control Sets the Derivative term for Oscillator Temperature Control
 Returns OSCDERV? Returns OSCDERV?
Line 397: Line 397:
  
 ---- ----
-<function=ICEfunc|0=AMPPROP&1=F:   Proportional  Gain:7.500000&2=AMPPROP 7.500000&-1>+<function=ICEfunc|0=AMPPROP&1=F:Proportional Gain :7.500000&2=AMPPROP 7.500000&-1>
 Sets the Proportional gain for Amplifier Temperature Control Sets the Proportional gain for Amplifier Temperature Control
 Returns AMPPROP?            Returns AMPPROP?           
Line 406: Line 406:
  
 ---- ----
-<function=ICEfunc|0=AMPINT&1=F:   Integral  Gain:2.0&2=AMPINT 2.0&-1>+<function=ICEfunc|0=AMPINT&1=F:Integral Gain :2.0&2=AMPINT 2.0&-1>
 Sets the Integral gain for Amplifier Temperature Control Sets the Integral gain for Amplifier Temperature Control
 Returns AMPINT? Returns AMPINT?
Line 415: Line 415:
  
 ---- ----
-<function=ICEfunc|0=AMPDERV&1=F:   Derivative:0.5&2=AMPDERV 0.5&-1>+<function=ICEfunc|0=AMPDERV&1=F:Derivative :0.5&2=AMPDERV 0.5&-1>
 Sets the Derivative term for Amplifier Temperature Control Sets the Derivative term for Amplifier Temperature Control
 Returns AMPDERV? Returns AMPDERV?
Line 422: Line 422:
 Reads the enabled status of Proportional Gain for Cavity Temperature Control Reads the enabled status of Proportional Gain for Cavity Temperature Control
 ---- ----
-<function=ICEfunc|0=CAPROEN&1=I:   0 = OFF  1 = ON :OFF&2=CAPROEN OFF&-1>+<function=ICEfunc|0=CAPROEN&1=I:0 = OFF  1 = ON  :OFF&2=CAPROEN OFF&-1>
 Sets the enabled status of Proportional Gain for Cavity Temperature Control Sets the enabled status of Proportional Gain for Cavity Temperature Control
 Returns CAPROEN? Returns CAPROEN?
Line 429: Line 429:
 Reads the enabled status of Proportional Gain for Oscillator Temperature Control Reads the enabled status of Proportional Gain for Oscillator Temperature Control
 ---- ----
-<function=ICEfunc|0=OSPROEN&1=I:   0 = OFF  1 = ON :OFF&2=OSPROEN OFF&-1>+<function=ICEfunc|0=OSPROEN&1=I:0 = OFF 1 = ON  :OFF&2=OSPROEN OFF&-1>
 Sets the enabled status of Proportional Gain for Oscillator Temperature Control Sets the enabled status of Proportional Gain for Oscillator Temperature Control
 Returns OSPROEN? Returns OSPROEN?
Line 436: Line 436:
 Reads the enabled status of Proportional Gain for Amplifier Temperature Control Reads the enabled status of Proportional Gain for Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMPROEN&1=I:   0 = OFF  1 = ON :OFF&2=AMPROEN OFF&-1>+<function=ICEfunc|0=AMPROEN&1=I: 0 = OFF  1 = ON  :OFF&2=AMPROEN OFF&-1>
 Sets the enabled status of Proportional Gain for Amplifier Temperature Control Sets the enabled status of Proportional Gain for Amplifier Temperature Control
 Returns AMPROEN? Returns AMPROEN?
Line 445: Line 445:
  
 ---- ----
-<function=ICEfunc|0=CAVSLEW&1=F:  Slew Rate:3.5&2=CAVSLEW 3.5&-1>+<function=ICEfunc|0=CAVSLEW&1=F: Slew Rate :3.5&2=CAVSLEW 3.5&-1>
 Sets the Slew Rate of the Cavity Temperature Control [°C/min] Sets the Slew Rate of the Cavity Temperature Control [°C/min]
 Returns: CAVSLEW? Returns: CAVSLEW?
Line 454: Line 454:
  
 ---- ----
-<function=ICEfunc|0=OSCSLEW&1=F:  Slew Rate:3.5&2=OSCSLEW 3.5&-1>+<function=ICEfunc|0=OSCSLEW&1=F: Slew Rate :3.5&2=OSCSLEW 3.5&-1>
 Sets the Slew Rate of the Oscillator Temperature Control [°C/min] Sets the Slew Rate of the Oscillator Temperature Control [°C/min]
 Returns: OSCSLEW? Returns: OSCSLEW?
Line 463: Line 463:
  
 ---- ----
-<function=ICEfunc|0=AMPSLEW&1=F:  Slew Rate:3.5&2=AMPSLEW 3.5&-1>+<function=ICEfunc|0=AMPSLEW&1=F: Slew Rate :3.5&2=AMPSLEW 3.5&-1>
 Sets the Slew Rate of the Amplifier Temperature Control [°C/min] Sets the Slew Rate of the Amplifier Temperature Control [°C/min]
 Returns: AMPSLEW? Returns: AMPSLEW?
Line 472: Line 472:
  
 ---- ----
-<function=ICEfunc|0=CASLWEN&1=I:   0 = OFF  1 = ON:ON&2=CASLWEN ON&-1>+<function=ICEfunc|0=CASLWEN&1=I:  0 = OFF  1 = ON :ON&2=CASLWEN ON&-1>
 Sets the Slew Rate Enabled state of the Cavity Temperature Control Sets the Slew Rate Enabled state of the Cavity Temperature Control
 Returns: CASLWEN? Returns: CASLWEN?
Line 481: Line 481:
  
 ---- ----
-<function=ICEfunc|0=OSSLWEN&1=I:   0 = OFF  1 = ON:ON&2=OSSLWEN ON&-1>+<function=ICEfunc|0=OSSLWEN&1=I:  0 = OFF  1 = ON :ON&2=OSSLWEN ON&-1>
 Sets the Slew Rate Enabled state of the Oscillator Temperature Control Sets the Slew Rate Enabled state of the Oscillator Temperature Control
 Returns: OSSLWEN? Returns: OSSLWEN?
Line 489: Line 489:
 Reads the Slew Rate Enabled state of the Amplifier Temperature Control Reads the Slew Rate Enabled state of the Amplifier Temperature Control
 ---- ----
-<function=ICEfunc|0=AMSLWEN&1=I:   0 = OFF  1 = ON:ON&2=AMSLWEN ON&-1>+<function=ICEfunc|0=AMSLWEN&1=I:  0 = OFF  1 = ON :ON&2=AMSLWEN ON&-1>
 Sets the Slew Rate Enabled state of the Amplifier Temperature Control Sets the Slew Rate Enabled state of the Amplifier Temperature Control
 Returns: AMSLWEN? Returns: AMSLWEN?
Line 498: Line 498:
  
 ---- ----
-<function=ICEfunc|0=CATILIM&1=F:   Current Limit:0.6&2=CATILIM 0.6&-1>+<function=ICEfunc|0=CATILIM&1=F:Current Limit :0.6&2=CATILIM 0.6&-1>
 Sets the Cavity Temperature Control Current Limit [A] Sets the Cavity Temperature Control Current Limit [A]
 Returns: CATILIM? Returns: CATILIM?
Line 507: Line 507:
  
 ---- ----
-<function=ICEfunc|0=OSTILIM&1=F:   Current Limit:0.500000&2=OSTILIM 0.500000&-1>+<function=ICEfunc|0=OSTILIM&1=F:Current Limit :0.500000&2=OSTILIM 0.500000&-1>
 Sets the Oscillator Temperature Control Current Limit [A] Sets the Oscillator Temperature Control Current Limit [A]
 Returns: OSTILIM? Returns: OSTILIM?
Line 516: Line 516:
  
 ---- ----
-<function=ICEfunc|0=AMTILIM&1=F:   Current Limit:0.5&2=AMTILIM 0.5&-1>+<function=ICEfunc|0=AMTILIM&1=F:Current Limit :0.5&2=AMTILIM 0.5&-1>
 Sets the Amplifier Temperature Control Current Limit [A] Sets the Amplifier Temperature Control Current Limit [A]
 Returns: AMTILIM? Returns: AMTILIM?
Line 525: Line 525:
  
 ---- ----
- +<function=ICEfunc|0=CATPLIM&1=F:Power Limit :7.000000&2=CATPLIM 7.000000&-1>
-<function=ICEfunc|0=CATPLIM&1=F:   Power Limit:7.000000&2=CATPLIM 7.000000&-1>+
 Sets the Cavity Temperature Control Power Limit [W] Sets the Cavity Temperature Control Power Limit [W]
 Returns: CATPLIM? Returns: CATPLIM?
Line 535: Line 534:
  
 ---- ----
-<function=ICEfunc|0=OSTPLIM&1=F:   Power Limit:7&2=OSTPLIM 7&-1>+<function=ICEfunc|0=OSTPLIM&1=F:Power Limit :7&2=OSTPLIM 7&-1>
 Sets the Oscillator Temperature Control Power Limit [W] Sets the Oscillator Temperature Control Power Limit [W]
 Returns: OSTPLIM? Returns: OSTPLIM?
Line 544: Line 543:
  
 ---- ----
-<function=ICEfunc|0=AMTPLIM&1=F:   Power Limit :6.5&2=AMTPLIM 6.5&-1>+<function=ICEfunc|0=AMTPLIM&1=F:Power Limit  :6.5&2=AMTPLIM 6.5&-1>
 Sets the Amplifier Temperature Control Power Limit [W] Sets the Amplifier Temperature Control Power Limit [W]
 Returns: AMTPLIM? Returns: AMTPLIM?
  
 ---- ----
 +
 <function=ICEfunc|0=CATWARN?&1=&2=CATWARN? 5.000000&-1> <function=ICEfunc|0=CATWARN?&1=&2=CATWARN? 5.000000&-1>
 Reads the Temperature Error Warning Threshold of the Cavity Temperature Control [mK] Reads the Temperature Error Warning Threshold of the Cavity Temperature Control [mK]
  
 ---- ----
-<function=ICEfunc|0=CATWARN&1=F:  Warning      Threshold:1.0&2=CATWARN 1.0&-1>+<function=ICEfunc|0=CATWARN&1=F: Warning Threshold :1.0&2=CATWARN 1.0&-1>
 the Temperature Error Warning Threshold of the Cavity Temperature Control [mK] the Temperature Error Warning Threshold of the Cavity Temperature Control [mK]
 Returns: CATWARN? Returns: CATWARN?
Line 562: Line 562:
  
 ---- ----
-<function=ICEfunc|0=OSTWARN&1=F:  Warning   Threshold:1.0&2=OSTWARN 1.0&-1>+<function=ICEfunc|0=OSTWARN&1=F: Warning Threshold :1.0&2=OSTWARN 1.0&-1>
 the Temperature Error Warning Threshold of the Oscillator Temperature Control [mK] the Temperature Error Warning Threshold of the Oscillator Temperature Control [mK]
 Returns: OSTWARN? Returns: OSTWARN?
Line 571: Line 571:
  
 ---- ----
-<function=ICEfunc|0=AMTWARN&1=F:  Warning   Threshold:1.0&2=AMTWARN 1.0&-1>+<function=ICEfunc|0=AMTWARN&1=F: Warning Threshold :1.0&2=AMTWARN 1.0&-1>
 the Temperature Error Warning Threshold of the Amplifier Temperature Control [mK] the Temperature Error Warning Threshold of the Amplifier Temperature Control [mK]
 Returns: AMTWARN? Returns: AMTWARN?
Line 579: Line 579:
  
 ---- ----
-<function=ICEfunc|0=CATMAX&1=F:  Maximum      Temperature:40.0&2=CATMAX 40.0&-1>+<function=ICEfunc|0=CATMAX&1=F: Maximum Temperature :40.0&2=CATMAX 40.0&-1>
 Sets the Maximum Temperature Limit of the Cavity Temperature Control [C] Sets the Maximum Temperature Limit of the Cavity Temperature Control [C]
 Returns: CATMAX? Returns: CATMAX?
Line 587: Line 587:
  
 ---- ----
-<function=ICEfunc|0=OSTMAX&1=F:  Maximum   Temperature:30.0&2=OSTMAX 30.0&-1>+<function=ICEfunc|0=OSTMAX&1=F: Maximum Temperature :30.0&2=OSTMAX 30.0&-1>
 Sets the Maximum Temperature Limit of the Oscillator Temperature Control [C] Sets the Maximum Temperature Limit of the Oscillator Temperature Control [C]
 Returns: OSTMAX? Returns: OSTMAX?
Line 596: Line 596:
  
 ---- ----
-<function=ICEfunc|0=AMTMAX&1=F:  Maximum   Temperature:30.0&2=AMTMAX 30.0&-1>+<function=ICEfunc|0=AMTMAX&1=F: Maximum Temperature :30.0&2=AMTMAX 30.0&-1>
 Sets the Maximum Temperature Limit of the Amplifier Temperature Control [C] Sets the Maximum Temperature Limit of the Amplifier Temperature Control [C]
 Returns: AMTMAX? Returns: AMTMAX?
Line 604: Line 604:
  
 ---- ----
-<function=ICEfunc|0=CATMIN&1=F:  Minimum      Temperature:-4.0&2=CATMIN -4.0&-1>+<function=ICEfunc|0=CATMIN&1=F: Minimum Temperature :-4.0&2=CATMIN -4.0&-1>
 Sets the Minimum Temperature Limit of the Cavity Temperature Control [C] Sets the Minimum Temperature Limit of the Cavity Temperature Control [C]
 Returns: CATMIN? Returns: CATMIN?
Line 612: Line 612:
  
 ---- ----
-<function=ICEfunc|0=OSTMIN&1=F:  Minimum      Temperature:-4.0&2=OSTMIN -4.0&-1>+<function=ICEfunc|0=OSTMIN&1=F: Minimum Temperature :-4.0&2=OSTMIN -4.0&-1>
 Sets the Minimum Temperature Limit of the Oscillator Temperature Control [C] Sets the Minimum Temperature Limit of the Oscillator Temperature Control [C]
 Returns: OSTMIN? Returns: OSTMIN?
Line 621: Line 621:
  
 ---- ----
-<function=ICEfunc|0=AMTMIN&1=F:  Minimum      Temperature:-4.0&2=AMTMIN -4.0&-1>+<function=ICEfunc|0=AMTMIN&1=F: Minimum Temperature :-4.0&2=AMTMIN -4.0&-1>
 Sets the Minimum Temperature Limit of the Oscillator Temperature Control [C] Sets the Minimum Temperature Limit of the Oscillator Temperature Control [C]
 Returns: AMTMIN? Returns: AMTMIN?
Line 629: Line 629:
  
 ---- ----
-<function=ICEfunc|0=CASDTIM&1=F: Seconds:5.0&2=CASDTIM 5.0&-1>+<function=ICEfunc|0=CASDTIM&1=F:Seconds :5.0&2=CASDTIM 5.0&-1>
 Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Cavity Temperature Control Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Cavity Temperature Control
 Returns: CASDTIM? Returns: CASDTIM?
Line 637: Line 637:
  
 ---- ----
-<function=ICEfunc|0=OSSDTIM&1=F: Seconds:5.0&2=OSSDTIM 5.0&-1>+<function=ICEfunc|0=OSSDTIM&1=F:Seconds :5.0&2=OSSDTIM 5.0&-1>
 Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Oscillator Temperature Control Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Oscillator Temperature Control
 Returns: OSSDTIM? Returns: OSSDTIM?
Line 645: Line 645:
  
 ---- ----
-<function=ICEfunc|0=AMSDTIM&1=F: Seconds:5.0&2=AMSDTIM 5.0&-1>+<function=ICEfunc|0=AMSDTIM&1=F:Seconds :5.0&2=AMSDTIM 5.0&-1>
 Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Amplifier Temperature Control Sets the Number of Seconds Until Temperature Control Shuts Down When Temperature Exceeds a Maximum or Minimum for Amplifier Temperature Control
 Returns: AMSDTIM? Returns: AMSDTIM?
Line 657: Line 657:
  
  
-=====New Table=====+=====Laser Current Controls=====
 <function=ICEfunc|0=OSISETP?&1=&2=OSISETP? 997.939941&-1> <function=ICEfunc|0=OSISETP?&1=&2=OSISETP? 997.939941&-1>
 Reads the Current Setpoint for the Oscillator Laser [mA]  Reads the Current Setpoint for the Oscillator Laser [mA] 
  
 ---- ----
-<function=ICEfunc|0=OSISETP&1=F:   Laser   Current    Setpoint    :850&2=OSISETP 850&-1>+<function=ICEfunc|0=OSISETP&1=F: Laser Current Setpoint:850&2=OSISETP 850&-1>
 Sets the Current Setpoint for the Oscillator Laser [mA] Sets the Current Setpoint for the Oscillator Laser [mA]
 Returns: OSISETP? Returns: OSISETP?
Line 671: Line 671:
  
 ---- ----
-<function=ICEfunc|0=AMISETP&1=F:   Laser   Current    Setpoint    :1400.0&2=AMISETP 1400.0&-1>+<function=ICEfunc|0=AMISETP&1=F: Laser Current Setpoint:1400.0&2=AMISETP 1400.0&-1>
 Sets the Current Setpoint for the Amplifier Laser [mA] Sets the Current Setpoint for the Amplifier Laser [mA]
 Returns: AMISETP? Returns: AMISETP?
Line 688: Line 688:
  
 ---- ----
-<function=ICEfunc|0=OSCILIM&1=F:   Current Limit:1000&2=OSCILIM 1000&-1>+<function=ICEfunc|0=OSCILIM&1=F:  Current Limit :1000&2=OSCILIM 1000&-1>
 Sets the Laser Current Limit for Oscillator [mA]  Sets the Laser Current Limit for Oscillator [mA] 
 Returns: OSCILIM? Returns: OSCILIM?
Line 697: Line 697:
  
 ---- ----
-<function=ICEfunc|0=AMCILIM&1=F:   Current Limit:1575&2=AMCILIM 1575&-1>+<function=ICEfunc|0=AMCILIM&1=F: Current Limit :1575&2=AMCILIM 1575&-1>
 Sets the Laser Current Limit for Amplifier [mA]  Sets the Laser Current Limit for Amplifier [mA] 
 Returns: AMCILIM? Returns: AMCILIM?
Line 706: Line 706:
  
 ---- ----
-<function=ICEfunc|0=OSCPLIM&1=F:   Power Limit:10&2=OSCPLIM 10&-1>+<function=ICEfunc|0=OSCPLIM&1=F: Power Limit :10&2=OSCPLIM 10&-1>
 Sets the Laser Power Limit for Oscillator [W]  Sets the Laser Power Limit for Oscillator [W] 
 Returns: OSCPLIM? Returns: OSCPLIM?
Line 715: Line 715:
  
 ---- ----
-<function=ICEfunc|0=AMCPLIM&1=F:   Power Limit:10&2=AMCPLIM 10&-1>+<function=ICEfunc|0=AMCPLIM&1=F: Power Limit :10&2=AMCPLIM 10&-1>
 Sets the Laser Power Limit for Amplifier [W]  Sets the Laser Power Limit for Amplifier [W] 
 Returns: AMCPLIM? Returns: AMCPLIM?
Line 725: Line 725:
  
 ---- ----
-<function=ICEfunc|0=_OSCTLIMMAX&1=F:   Laser   Temperature    Upper Limit    :33.5&2=_OSCTLIMMAX 33.5&-1>+<function=ICEfunc|0=_OSCTLIMMAX&1=F: Laser Temperature Upper Limit:33.5&2=_OSCTLIMMAX 33.5&-1>
 Sets the Oscillator Laser Temperature Upper Limit [°C]  Sets the Oscillator Laser Temperature Upper Limit [°C] 
 (Laser is shut down if exceeded) (Laser is shut down if exceeded)
Line 736: Line 736:
  
 ---- ----
-<function=ICEfunc|0=_AMPTLIMMAX&1=F:   Laser   Temperature    Upper Limit    :33.5&2=_ AMPTLIMMAX 33.5&-1>+<function=ICEfunc|0=_AMPTLIMMAX&1=F: Laser Temperature Upper Limit:33.5&2=_ AMPTLIMMAX 33.5&-1>
 Sets the Amplifier Laser Temperature Upper Limit [°C]  Sets the Amplifier Laser Temperature Upper Limit [°C] 
 (Laser is shut down if exceeded) (Laser is shut down if exceeded)
Line 747: Line 747:
  
 ---- ----
-<function=ICEfunc|0=_OSCTLIMMIN&1=F:   Laser   Temperature    Lower Limit    :5.5&2=_OSCTLIMMIN 5.5&-1>+<function=ICEfunc|0=_OSCTLIMMIN&1=F: Laser Temperature Lower Limit:5.5&2=_OSCTLIMMIN 5.5&-1>
 Sets the Oscillator Laser Temperature Lower Limit [°C]  Sets the Oscillator Laser Temperature Lower Limit [°C] 
 (Laser is shut down if exceeded) (Laser is shut down if exceeded)
Line 758: Line 758:
  
 ---- ----
-<function=ICEfunc|0=_AMPTLIMMIN&1=F:   Laser   Temperature    Lower Limit    :5.5&2=_ AMPTLIMMIN 5.5&-1>+<function=ICEfunc|0=_AMPTLIMMIN&1=F: Laser Temperature Lower Limit:5.5&2=_ AMPTLIMMIN 5.5&-1>
 Sets the Amplifier Laser Temperature Lower Limit [°C]  Sets the Amplifier Laser Temperature Lower Limit [°C] 
 (Laser is shut down if exceeded) (Laser is shut down if exceeded)
Line 772: Line 772:
  
  
-=====New Table=====+=====Laser PZT Controls=====
 <function=ICEfunc|0=CADCBSP?&1=&2=CADCBSP? 60.000000&-1> <function=ICEfunc|0=CADCBSP?&1=&2=CADCBSP? 60.000000&-1>
 Reads the DC Bias Setpoint for the Cavity [V] Reads the DC Bias Setpoint for the Cavity [V]
  
 ---- ----
-<function=ICEfunc|0=CADCBSP&1=F:   Voltage:60&2=CADCBSP 60&-1>+<function=ICEfunc|0=CADCBSP&1=F:  Voltage :60&2=CADCBSP 60&-1>
 Sets the DC Bias Setpoint for the Cavity [V] Sets the DC Bias Setpoint for the Cavity [V]
 Returns: CADCBSP? Returns: CADCBSP?
Line 790: Line 790:
  
 ---- ----
-<function=ICEfunc|0=VLIM&1=F:  Voltage:90&2=VLIM 90&-1>+<function=ICEfunc|0=VLIM&1=F: Voltage :90&2=VLIM 90&-1>
 Sets the DC Bias Setpoint Limit for the Cavity [V] Sets the DC Bias Setpoint Limit for the Cavity [V]
 Returns: VLIM? Returns: VLIM?
Line 802: Line 802:
  
  
-=====New Table=====+=====Mode Lock Controls=====
 <function=ICEfunc|0=MLDCTHR?&1=&2=MLDCTRH? 8000.000000 [mV]&-1> <function=ICEfunc|0=MLDCTHR?&1=&2=MLDCTRH? 8000.000000 [mV]&-1>
 Reads the Mode Lock DC Threshold Parameter [mV] Reads the Mode Lock DC Threshold Parameter [mV]
 ---- ----
-<function=ICEfunc|0=MLDCTHR&1=F: Voltage:[mV]&2=MLDCTRH 6000 [mV]&-1>+<function=ICEfunc|0=MLDCTHR&1=F:Voltage :6000&2=MLDCTRH 6000 [mV]&-1>
 Sets the Mode Lock DC Threshold Parameter [mV] Sets the Mode Lock DC Threshold Parameter [mV]
 Returns: MLDCTHR? Returns: MLDCTHR?
Line 813: Line 813:
 Reads the Mode Lock RMS Threshold Parameter [mV] Reads the Mode Lock RMS Threshold Parameter [mV]
 ---- ----
-<function=ICEfunc|0=MLRMTHR&1=F: Voltage:[mV]&2=MLRMTHR 110 [mV]&-1>+<function=ICEfunc|0=MLRMTHR&1=F:Voltage :110&2=MLRMTHR 110 [mV]&-1>
 Sets the Mode Lock RMS Threshold Parameter [mV] Sets the Mode Lock RMS Threshold Parameter [mV]
 Returns: MLRMTHR? Returns: MLRMTHR?
Line 820: Line 820:
 Reads the Mode Lock Sample Limit Reads the Mode Lock Sample Limit
 ---- ----
-<function=ICEfunc|0=MLSMPLM&1=I: Limit:250&2=MLSMPLM 250&-1>+<function=ICEfunc|0=MLSMPLM&1=I:Limit :250&2=MLSMPLM 250&-1>
 Sets the Mode Lock Sample Limit Sets the Mode Lock Sample Limit
 Returns: MLSMPLM? Returns: MLSMPLM?
Line 827: Line 827:
 Reads the Mode Lock Status [Off/On] Reads the Mode Lock Status [Off/On]
 ---- ----
-<function=ICEfunc|0=#MLSTATS&1=I: State:ON&2=#MLSTATS ON&-1>+<function=ICEfunc|0=#MLSTATS&1=I:State :ON&2=#MLSTATS ON&-1>
 Enables / Disables Touch Screen Display of Mode Lock Mean and Standard Deviation Enables / Disables Touch Screen Display of Mode Lock Mean and Standard Deviation
 Returns: ON or OFF in response to argument Returns: ON or OFF in response to argument
 ---- ----
 +
 +
 +
 +
 +
 +