Differences

This shows you the differences between two versions of the page.

--- d2:power_supply [2023/02/01 18:54] – external edit 127.0.0.1
+++ d2:power_supply [2023/02/01 21:10] (current) – external edit 127.0.0.1
@@ Line 124: / Line 124: @@
-Power is supplied to the D2-005 via a standard C13 to Type-B power cord. Connections to additional electronics modules are made through 9-pin D-sub connectors via any compatible serial cable. The D2 Electronics implement a "daisy chain" power configuration, in which each subsequent unit can be powered through the unit before it in the chain and does not need to be powered directly by the D2-005. There are two 9-pin D-sub connectors on the back of the D2-005. Either or both can be used to power external electronics, however, current is shared between the two connectors. The maximum power rating for the 5V line is 30W (6A), and for the ±15V line is 22.5W (1.5A). The pin outs are shown in the following figure:
+Power is supplied to the D2-005 via a standard C13 to Type-B power cord. Connections to additional electronics modules are made through 9-pin D-sub connectors via any compatible serial cable. The D2 Electronics implement a "daisy chain" power configuration, in which each subsequent unit can be powered through the unit before it in the chain and does not need to be powered directly by the D2-005. There are two 9-pin D-sub connectors on the back of the D2-005. Either or both can be used to power external electronics, however, maximum rated current is shared between the two connectors. The maximum power rating for the 5V line is 30W (6A), and for the ±15V line is 22.5W (1.5A). The pin outs are shown in the following figure:
 {{ :d2:d-sub_power_pinout.jpg?nolink&150 |}}