Differences

This shows you the differences between two versions of the page.

--- d2:offset_phase_lock_servo [2019/11/20 02:01] – [Options] Michael Radunsky
+++ d2:offset_phase_lock_servo [2019/11/20 02:03] – [Modes] Michael Radunsky
@@ Line 93: / Line 93: @@
 =====Modes=====
-The OPLS operates in 12 different modes, controlled by the front-panel knob or with external inputs to the back-panel. These 12 modes select the value of the divide-by-N (N=8,16,32, or 64) and select between three states for the reference frequency (external input, internal VCO High, internal VCO Low).  The table below shows the offset frequency ranges for these 12 different modes.
+The OPLS operates in 12 different modes, controlled by the front-panel knob or with external inputs to the back-panel. These 12 modes select the value of the divide-by-N (N=8, 16, 32, or 64) and select between three states for the reference frequency (external input, internal VCO High, internal VCO Low).  The table below shows the offset frequency ranges for these 12 different modes.
 <WRAP center round box 70%>
@@ Line 100: / Line 100: @@
 ^ ^^  N=8  ^  N=16  ^  N=32  ^  N=64  ^
 ^  Reference \\ Frequency \\ Setting  ^External |250 - 1,920|480 - 3,840|960 - 7,680|1,920 - 10,000|
-^:::^External Reference Input Frequency |30 - 240||||
+^:::^External Reference Input Frequency |30 - 240 MHz||||
 ^:::^Internal VCO Low |385 - 850|770 - 1,700|1,540 - 3,400|3,080 - 6,800|
 ^:::^Internal VCO High |770 - 1,700|1,540 - 3,400|3,080 - 6,800|6,160 - 10,000|