User Tools

Site Tools


d2:laser_servo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

d2:laser_servo [2021/03/02 17:06] – [Specifications] Michael Radunskyd2:laser_servo [2021/12/17 01:58] (current) – external edit 127.0.0.1
Line 317: Line 317:
  
 {{ :d2:d-sub_power_pinout.jpg?nolink&150 |}} {{ :d2:d-sub_power_pinout.jpg?nolink&150 |}}
 +
 +
 +While it is infrequent, the D2-005 power supply may occasionally radiate noise from the side of its chassis onto nearby electronics. This only occurs in some system configurations, and will appear as a signal at the frequency of your mains electricity (typically either 50 Hz or 60 Hz). This noise can easily be removed by moving the D2-005 at least 18 inches (45cm) away from other electronics, rotating it 90° such that the sides of the D2-005 face away, or by moving the entire power supply to a different shelf. To accommodate this, all D2-005's are shipped with a 5' DB9 cable as of January 1, 2022. 
  
 **Absolute Jump TTL (BNC)** **Absolute Jump TTL (BNC)**
d2/laser_servo.1614704762.txt.gz · Last modified: 2021/08/26 14:26 (external edit)