Product Manuals

User Tools

Site Tools

You are here: manuals » d2 » laser_servo
d2:laser_servo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
d2:laser_servo [2019/02/21 17:45] – Michael Radunskyd2:laser_servo [2019/02/21 17:46] – Michael Radunsky
Line 243: Line 243:
 ===Auxiliary Servo: Gain (25-turn trimpot)=== ===Auxiliary Servo: Gain (25-turn trimpot)===
  
-This trimpot sets the gain for the AUXILIARY SERVO OUTPUT. The Aux Servo is a pure integrator and the gain ranges from 500 μs to 5 s.  It is a 20-turn pot.  Full ccw sets gain to minimum (5 s), full cw sets gain to maximum (500 µs).+This trimpot sets the gain for the AUXILIARY SERVO OUTPUT. The Aux Servo is a pure integrator and the gain ranges from 500 μs to 5 s.  Full ccw sets gain to minimum (5 s), full cw sets gain to maximum (500 µs).
  
 <WRAP center round box 420px><imgcaption d2_125_side_panel_photo|Certain rarely used controls are only accessible by removing the right-side panel, as shown in the figure above.> <WRAP center round box 420px><imgcaption d2_125_side_panel_photo|Certain rarely used controls are only accessible by removing the right-side panel, as shown in the figure above.>
d2/laser_servo.txt · Last modified: 2021/12/17 01:58 by 127.0.0.1