Differences

This shows you the differences between two versions of the page.

--- slice:qt:firmware [2019/03/01 00:21] – [Connecting to Host PC] Michael Radunsky
+++ slice:qt:firmware [2019/03/01 00:30] – [Connecting to Host PC] Michael Radunsky
@@ Line 14: / Line 14: @@
 ====Connecting to Host PC====
-  - Create the following folder on your PC C:\Vescent\SLICE-QT\SLICE-QT-0001
+  - Create a folder on your PC named C:\Vescent\SLICE-QT\SLICE-QT-0001.
-  - Copy the latest System Controller firmware update .dfu file from the [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|github ftp website]] for latest firmware and GUI revisions) into the folder created in step 1.\\ The file will be named SystemController-x-x.dfu where x-x  will be the version number of the firmware.
+  - Copy the latest firmware update .zip file from the [[https://github.com/Vescent/SLICE-QT-Firmware-Upgrade|github ftp website] into the folder created in step 1. It will contain the latest firmware and GUI revisions.\\ The zipped file will contain a .dfu file (System Controller firmware) and will be named SystemController-x-x.dfu where x-x  will be the version number of the firmware and a .hex file named 90-00001-upgrade-QT-x-x.hex where x-x  will be the version number of the firmware.
-  - Copy the latest QT firmware update .hex file from the ftp website (see above) into the folder created in step 1.\\ The file will be named 90-00001-upgrade-x-x.hex where x-x  will be the version number of the firmware.
+  - Intentionally left blank.
   - Determine the COM port number for the SLICE unit’s USB connection. (You can skip this step if you already know which COM port is assigned to your SLICE unit.)
     - If the SLICE unit’s USB cable is connected to the PC, unplug it.