Differences

This shows you the differences between two versions of the page.

--- slice:qt:api [2019/02/19 00:19] – [Implementation Instructions] Kurt Vogel
+++ slice:qt:api [2019/02/21 15:44] – [SLICE-QT API] Michael Radunsky
@@ Line 1: / Line 1: @@
 ======SLICE-QT API======
-[[slice:qt|SLICE-QT Manual]]
+====Links====
+* **Quick-Start Guides**
+    * [[slice:quick_start_qt|SLICE-QT Quick Start]]
+*  **Electronics**
+    * [[slice:qt|SLICE-QT Manual]]
+    * [[slice:qt:firmware|SLICE-QT firmware upgrade instructions]]
+*  **Websites**
+    * [[https://www.vescent.com/products/electronics/slice/slice-qt-four-channel-temperature-controller/|SLICE-QT web page]]
 =====Implementation Instructions=====
@@ Line 30: / Line 38: @@
   - All temperatures are set and returned in degrees Celsius [˚C].
   - All currents are set and returned in Amperes [A].
 ----
 ===== Temperature Settings =====
@@ Line 128: / Line 137: @@
 For the Steinhart-Hart thermistor model: Returns the C coefficient for CHANNEL.
 ----
-<function=ICEfunc|0=TCoefB&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
+<function=ICEfunc|0=TCoefC&1=I:CHANNEL:1;F:VALUE:6.535076315&2=6.535076315&-1>
 For the Steinhart-Hart thermistor model: Sets the C coefficient to VALUE for CHANNEL. Returns **TCoefC?**.
 ----
@@ Line 225: / Line 234: @@
 | External Setpoint     |  1 - 4    |  3         | Gain [˚C/V]    | Offset [V]             | N/A                  |
 | Feedforward           |  1 - 4    |  4         | Gain [A/V]     | Offset [V]             | N/A                  |
 ----
 <function=ICEfunc|0=InputA?&2=2, 3, 0.500, 0.0&-1>