Product Manuals

User Tools

Site Tools

You are here: manuals » ffc » locking_electronics » slice-fpga-ii
ffc:locking_electronics:slice-fpga-ii

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
ffc:locking_electronics:slice-fpga-ii [2023/06/09 21:28] – external edit 127.0.0.1ffc:locking_electronics:slice-fpga-ii [2023/06/09 21:28] – external edit 127.0.0.1
Line 136: Line 136:
 =====Troubleshooting===== =====Troubleshooting=====
 ====Overview==== ====Overview====
-In many cases, all that is necessary to get up-and-running with the SLICE-FPGA-II is to install the correct WinPython distribution, and run the provided GUI software using the WinPython Spyder environment.+In many cases, all that is necessary to get up-and-running with the SLICE-FPGA-II is to install the correct WinPython distribution, and run the provided GUI software using the WinPython terminal.
 If you are unable to connect the GUI to the SLICE-FPGA-II, follow the below instructions to eliminate possible causes of failure. If you are unable to connect the GUI to the SLICE-FPGA-II, follow the below instructions to eliminate possible causes of failure.
  
ffc/locking_electronics/slice-fpga-ii.txt · Last modified: 2023/08/09 00:20 by 127.0.0.1